What are the sizes of aggregate?

– Coarse aggregates are particulates that are greater than 4.75mm. The usual range employed is between 9.5mm and 37.5mm in diameter. – Fine aggregates are usually sand or crushed stone that are less than 9.55mm in diameter. Typically the most common size of aggregate used in construction is 20mm.

What are the different classification of aggregates?

Classification of Aggregates
CategoryUnit Weight of Dry-rodded Aggregate (kg/m3)Typical Concrete Strengths (MPa)
Ultra lightweight Lightweight Structural Lightweight Normal weight Heavyweight<500 500-800 650-1100 1100-1750 >2100<7 7-14 17-35 20-40 20-40

What is aggregate classification of aggregate?

Classification of aggregate According to size:

The aggregate containing both aggregate i.e. fine aggregate and coarse aggregate is called as All-in-One aggregate.

What are the 4 main types of aggregates?

Aggregates Definition:

It includes gravel, crushed rock, sand, recycled concrete, slag, and synthetic aggregate.

What size is Type 3 aggregate?

In very general terms, Type 3 is an open graded crushed aggregate roughly in the range 40mm to dust.

What size is #89 aggregate?

#89 Granite Stone is a crushed angular Granite aggregate. It is sometimes referred to as Pea Gravel. Sizing of #89 Stone is 3/8″.

What size is type 2 aggregate?

Type 2. Like Type 1, this is crushed stone but less than 40mm in size down to dust and with no specified grading. It contains finer material than type 1 and is used as granular sub base.

What size is #67 aggregate?

#67. Crushed stone #67 includes stone that is ¾” or smaller in size. This is a great material for road and slab base as well as fill.

What size is number 2 aggregate?

1½ inches to 2½ inches
#2 Stone – small particles, typically ranging from 1½ inches to 2½ inches in diameter. #2 stone is most often seen utilized in stabilized construction entrances and in stone reservoirs.

What is Type 1 aggregate used for?

MOT Type 1 (hardcore) is crushed carboniferous limestone, used to create a hardcore base under patios, paving, driveways and artificial grass. It can also be used as a filling product.

What is Type 4 stone?

Type 4 stones have high compressive strength and low expansion, ideal for making master models. Each stone developed by Zhermack has specific technical characteristics for each individual application.

What is Type 1 fill material?

Type 1 Sub Base is generally a 40mm graded to dust material that is laid and compacted to form a level stable construction layer as a platform for asphalt or concrete. It is typically used in the construction of highways, car parks, footways and hard standing areas.

What is Type 2 aggregate used for?

Type 2 compacts nicely to form a sound free-draining base for paths, walkways, tracks, patios and driveways. It can also be used to fill pot holes or as a backfill material.

What are the 4 types of concrete?

Let’s take a quick look at the most common types of concrete and what they are used for:
  • Reinforced Concrete.
  • Lightweight Concrete.
  • High-Strength Concrete.
  • High-Performance Concrete.
  • Precast Concrete.

What is Type 2 aggregate base?

A crushed and graded blend of aggregates designed to compact tightly with the proper equipment. It provides an excellent base to concrete pavers and asphalt or can be used alone as a driveway or pathway.

What size is 2 stone?

#2 (2 1/2″) crushed stone is a combination of assorted sized material that ranges from 1 1/2″ through 2 1/2″ which has been crushed and compacted in size, then processed through a square screen 3″ in size.

Can you use Type 1 concrete?

MOT Type 1 is a sub-base material used in road construction, often crushed concrete or granite.

What is type1 rock?

Wilson Class 1 Type A Permeable is a clean, washed, crushed granite. The product meets Cal Trans Section 68-1 for permeable products. The aggregate is approximately 3/8″ and is typically specified for uses such as behind retaining walls and in drainage situations using filter fabrics.