Is there a reset button on electric dryers?

Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.

When I press the start button on my GE dryer nothing happens?


But nothing happens when you press the start switch. The switch itself could be to blame. Test it with a multimeter (or get a specialist to do it). If there’s no continuity, your dryer could be repaired with a simple replacement start switch.

Where is the reset button on my dryer?

Generally speaking, you would reset a dryer by pressing the reset button that is located on the control panel. This will help to clear any issues that may be happening with the dryer. It may be necessary to wait until the motor cools down before you push the reset button, but it should fix most problems.

What would cause a GE dryer not to start?

If your dryer will not run or start, check the following: Make sure the dryer plug is pushed completely into the wall outlet. Check that the dryer door is closed tightly. Make sure that the cycle selection button is positioned on the desired temperature, fabric and drying time.

How do you reset a GE dryer?

To reset a GE dryer, locate the reset button on the appliance. If there is no reset button, unplug the appliance directly from its power source and allow it to sit for ten minutes without power. Once the time has passed and the motor has cooled, plug it back in to see if issues have been resolved.

How do you check a GE dryer start switch?

Where is fuse on GE dryer?

In GE dryers, the thermal fuse–sometimes called a safety thermostat–is located behind the drum on the inside of the dryer. To access the thermal fuse you will need to open the dryer from the top. Though it may sound a bit daunting, opening the top of the dryer to reveal its inner workings is surprisingly simple.

How do you troubleshoot a dryer that won’t start?

Unplug the dryer and check the thermal fuse for continuity. Replace the thermal fuse if the multimeter measures no continuity. Check the exhaust vent because a clog in the vent likely caused the thermal fuse to blow. For dryers with a dial timer, a broken push-to-start switch can prevent the motor from running.

How do I troubleshoot my GE dryer?

How do I know if my dryer fuse is blown?

These simple steps summarize the process below:
  1. Unplug your dryer and ensure it is no longer connected to the gas or electric.
  2. Locate the thermal fuse, as above.
  3. Disconnect the thermal fuse from the wires.
  4. Test the fuse with a multimeter.
  5. If the needle on your multimeter does not move, your thermal fuse is blow.

How dO I know if my dryer thermal fuse is blown?

To test if your thermal fuse has blown, touch the right side of your multimeter lead to the right side of the fuse, and repeat with the left multimeter lead. If the multimeter needle fails to move, this indicates the thermal fuse has blown.

Can you reset a dryer thermal fuse?

What happens when thermal fuse blown on dryer?

This is different from the electrical fuses that are found in many appliances, and a dryer might have both. A thermal fuse will blow when the temperature gets too high, not when it’s drawing too much current. When it blows, the dryer stops generating heat. It’s necessary to replace it before the dryer will run again.

Will a dryer run with a blown thermal fuse?

Many dryers simply will not run once a thermal fuse triggers. On other models, the drum continues to turn and the dryer operates, but the heating element does not. Clothes come out of the dryer wet once the appliance completes its drying cycle.

Where’s the thermal fuse on a dryer?

How do I reset my thermal fuse?

  1. Step 1: Locate the Fuse. Study the owner’s manual for the location of the thermal fuse. …
  2. Step 2: Cut Power to the Dryer. …
  3. Step 3: Disassemble as Needed. …
  4. Step 4: Disconnect the Thermal Fuse. …
  5. Step 5: Conduct a Continuity Test. …
  6. Step 6: Purchase a Replacement. …
  7. Step 7: Replace the Fuse. …
  8. Step 8: Reassemble the Dryer and Test It.

How much does it cost to replace a dryer thermal fuse?

Other Costs to Fix a Dryer
PartMaterial CostTotal Cost
Thermal fuse$5 – $10$80 – $130
Dryer thermostat$3 – $20$180
Bearing$50$130 – $250
Roller$10 – $30$90 – $230

What causes an electric dryer to stop working?

A faulty or broken thermostat can make a dryer stop working. Replacing the fuse or the thermostat will allow the dryer to work again. A blown thermal fuse from overheating indicates an additional problem, such as improper ventilation.