What type of molding is used for cabinets?

There are several types of trim available for the top of kitchen cabinets. Crown molding and dentil molding are two of the most popular and can stand alone. To help connect your cabinets to the ceiling, you can also add rise molding beneath your crown molding.

What is the molding at the base of a cabinet called?

#8 – Bottom Molding

Molding at the bottom of the base cabinet doors and above the toe kick is also known as bottom molding. This molding can be used on kitchen islands to make them appear more like furniture.

What is trim called on top of cabinets?

crown molding
A decorative trim that sits at the top of the cabinet and provides a smooth transition from the cabinet to the ceiling is called crown molding. It comes in many shapes and sizes and adds detail that’s pleasing to the eye and indicative of the homeowner’s style.

What are the different types of cabinet finishes?

Cabinet Finishes
  • Waterborne UV Finish.
  • Stained Finish.
  • Glazed Finish.
  • Natural Finish.
  • Painted Finish.
  • Varnished Finish.
  • Distressed Finish.

What is cabinet fascia?

Fascia is typically any piece of wood used to finish off the front edge of a countertop on a set of base cabinets. Its face can be left exposed to highlight the wood’s grain patterns or it may be covered with a plastic laminate or tile.

What do you put on the bottom of kitchen cabinets?

Use a cushioned liner to protect the bottom of a cabinet that houses heavy cookware or canned goods. In cabinets that receive light use, adhesive-backed paper creates a protective surface that’s inexpensive and easy to clean.

What are the four types of finishes?

  • Dye. Dyes matches the existing color or it also changes the color of the surface. …
  • Oil finishes. Oil wood finishes improve the appearance of unfurnished wood. …
  • Varnish. Varnishes are made up of oil, solvents, and resins. …
  • Shellac. …
  • Stain. …
  • Lacquers. …
  • Water-Based Finishes. …
  • French Polish.

What are the 3 types of finishes?

What Are The Categories of Wood Finishes? There are three main types of timber finishes – evaporative, reactive and coalescing. Evaporative finishes use acetone, alcohol and nitro-cellulose lacquer thinners as solvents and thinners. Shellac and nitro-cellulose lacquers also fall into this category.

What is the most common cabinet overlay?

The most common overlay lengths on American cabinets are called partial overlay and full overlay. Partial overlay leaves some space between doors. Most common overlay lengths on American cabinets are 1/2-inch and 1 1/4-inch. Full overlay leaves little to no space between doors.

What is the recess at the bottom of a base cabinet called?

A toe kick is a notch-shaped recess at the bottom front of a base cabinet. It provides a recess for your feet so you can get slightly closes to the countertop.

What are the different parts of a cabinet called?

  • Cabinet Face Frame. Cabinet face frames provide stability, keeping the cabinet box square during shipping and installation. …
  • Doors and Drawer Fronts. Doors and drawer fonts are one of the most prominent cabinet parts. …
  • Hinges. …
  • Drawer Glides. …
  • Drawer Box. …
  • Interior Finish Material. …
  • Cabinet Shelves.

What is the bottom part of trim called?

baseboard
In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, trim, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall.

What is the piece of wood called at the bottom of kitchen cabinets?

The very bottom of the cabinet is recessed to allow room for your feet while you work at the countertop. This is called the toe kick. You can cut notches in the sides to create this area, so long as you added the extra height to these pieces.

What are cabinet Stiles?

Stile – The vertical-framing members of a cabinet face frame or cabinet door.

What are the grooves in cabinets called?

What Are The Grooves In Cabinets Called? The technique of joining cabinets together through the use of grooves is a very specific one. These grooves are called “mortises”. A mortise or groove is cut into the piece of wood used to join the kitchen cabinets together.

What are the three types of cabinets?

3 Types of Kitchen Cabinets

There are three types of cabinets: partial overlay, full overlay, and inset. Each term is used to describe how the cabinet door or drawer sits on or in the cabinet frame.

What does SB mean on cabinets?

SB36 = SB stands for Sink Base and 36 means the cabinet is 36” wide. B30 = B stands for Base and 30 means the cabinet is 30” wide.

What does RTA mean in cabinets?

Ready to Assemble
Updated on: September 02, 2021. Online kitchen cabinets can be purchased and delivered in one of two ways: Assembled or Ready to Assemble (RTA). Assembled kitchen cabinets, as the name implies, are delivered already built from the manufacturer and ready to be installed in the home.

What is a Nantucket cabinet?

Nantucket shaker panel cabinets offer premium features such as a solid hardwood frame, concealed drawer glide hardware, and full-overlay doors and drawer fronts with soft-close technology. Premium Features. • Smart 5-piece drawer fronts on all standard and deep drawer base cabinets.

What does D W mean in cabinets?

For example, some cabinets have diagonal corners labeled as “DCW” or “DW.” In this case, you’re looking for the diagonal edge size followed by the height: DW2432. A size that starts with “DB” is the drawer base; width “B” refers to the base cabinet width and “SB” is the sink base width.

What does FH mean on kitchen plan?

Full Height Base
FH – Full Height Base. This describes a door that is the Full Height (FH) of the base unit, also known as HiLine. No drawer is included with Full Height bases.