how to reset wyze cam
How do I get my WYZE camera back online?
- Unplug the base station from power, wait 5-10 seconds, then plug it back in.
- Once the status light is solid blue, the reboot is complete.
Where is the reset button on a Wyze Cam?
- Delete the camera from the App.
- Observe the back LED. It should change from solid blue to blinking yellow.
- Remove the micro SD card from the slot.
- Press and hold the setup button on the bottom of the camera for 10 seconds.
- Wait for the message “ready to connect”
How do I reset my WYZE camera to a new WiFi?
- Press and hold the on/off button on the side of the Plug until the status light begins to flash blue.
- Once the status light begins to flash blue, you can setup the Wyze Plug via the app again with the new WiFi network.
Why is my Wyze Cam not connecting?
Can you factory reset a blink camera?
How do I fix my WYZE camera?
- Check that your phone or tablet is on a 2.4 GHz network. On iOS: In the Settings app, tap Wi-Fi to see your network name. …
- Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. …
- Power cycle your Wyze Cam. …
- Force close the Wyze app, then open it again.
How do I reconnect my Wyze camera after unplugging?
Connect your Wyze camera to the USB port or a power outlet. Wait until it flashes yellow (about thirty seconds). Hold the Setup button on the back of the camera until you hear the automated message “ready to connect.”
Why is Wyze camera flashing?
What is error code 90 on Wyze camera?
What happens if you unplug WYZE camera?
What happens if you unplug a camera?
How do you Unbrick a Wyze camera?
What is error code 09 on Wyze camera?
Why do my Wyze cameras keep going offline?
Try a factory reset, and attempt set up as a new device: Remove the SD card if there is one inserted. Hold down the setup button until the status light turns solid red. Once the status light begins flashing red, you may attempt to set up again.
How do I factory reset my WYZE Cam v2?
With the Wyze Cam plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the device to initiate. This process can take up to 5 minutes.
How do I format my WYZE camera SD card?
- Remove the microSD card from the Wyze Cam.
- Insert the card into your computer. …
- Open your computer’s file browser.
- Right-click on the microSD card in the navigation panel. …
- Select “Format…” from the right-click menu.
- Ensure that the Format Type is set to FAT32.
- Click Start.
How do you fix unresponsive WYZE camera that won’t pass solid yellow light?
Check to see if you are using the power cable and wall plug that came packaged with the camera. If you are NOT using the power cable and wall plug that came with the camera, please switch to the power cable and wall plug that came with the camera to see if this resolves the issue.