How much does it cost to replace 1 wheel bearing?

What does it cost to replace wheel bearings? The cost to replace one front-wheel hub assembly varies widely. Some variables include the make and model, the garage’s labor rate and the cost for parts. The national average is about $350 to fix the wheel bearings at one wheel.

How much does a wheel bearing cost for Chevy Malibu?

A shop will charge you about $400 to diagnose and repair a faulty wheel bearing, but you can easily do it at home for a fraction of the cost. Malibu hubs and bearings (Part No. 13589507) usually go for about $200 (or $115 on our site).

Is it OK to drive with bad wheel bearing?

Q: Is it safe to drive with a bad wheel bearing? A: No. It can, in fact, be very dangerous to drive if one of your bearings is worn out, especially since it may cause the wheel to stop while driving. Additionally, a damaged wheel bearing puts a lot of stress on the hub, the CV joint, and the transmission itself.

Is it worth replacing wheel bearings?

Wheel bearings are theoretically engineered to last the life of the vehicle. There is no maintenance schedule for replacing wheel bearings, and there is no constant source of lubrication. However, they can be damaged. They are especially vulnerable if you hit a pothole, tall curb, or a speed bump at a brisk speed.

How do you diagnose wheel bearing problems?

The symptoms of bad wheel bearings include:
  1. Noise: A humming, rumbling or growling noise that increases with acceleration or as the vehicle turns. …
  2. Looseness, excessive play in the steering wheel (vague steering);
  3. Steering wheel vibration which changes with the vehicle speed or as the vehicle turns;
  4. ABS malfunctioning.

How much is a wheel bearing for a 2010 Malibu?

Wheel Bearing for 2010 Chevrolet Malibu – from $155.99+ | AutoZone.com.

How long does it take to change a wheel bearing?

How long does it take to replace Wheel Bearings? Replacing a single wheel bearing can take 90 to 120 minutes depending on the type of vehicle and complexity. There are a lot of moving parts that need to be maintained and properly sealed to complete this type of work.

How long will a wheel bearing last after it starts making noise?

about 85,000 to 100,000 miles
However, a wheel bearing can last an average of anywhere from 136,000 to 160,000 km which is about 85,000 to 100,000 miles.

How much does it cost to replace a bearing on a car?

The labor cost for a wheel bearing replacement also varies and will generally cost anywhere from $60 to $300. It should take between 1 to 1.5 labor hours to change the wheel bearing. In total, the cost to replace a wheel bearing is around $150 to $800.

What happens if you don’t fix a wheel bearing?

The bearings won’t allow the wheel to turn freely, which exacerbates the problem. It also puts stress and strain on the hub, the CV joint, the axle, and the transmission. Ultimate damage: If you don’t replace a damaged wheel bearing before it fails completely, the wheel will completely seize up.

How do you temporarily fix a wheel bearing?

Do wheel bearings affect brakes?

If you have a faulty or loose wheel bearing, the rotor will wobble on its axis. This wobble causes the rotor to push the caliper piston into its bore (See Image 2). Now, when you hit the brake pedal, the piston has to travel farther than normal to apply the brakes. This causes a low or spongy brake pedal.

Do you replace both wheel bearings at the same time?

Both wheel bearings have racked up the same number of miles, so it’s logical to conclude that both sides have probably experienced the same amount of wear. Based on this line of thinking, it would make sense to recommend replacing both wheel bearing hubs at the same time even though only one has obviously failed.

Can you replace a wheel bearing yourself?

You can save money by changing your own wheel bearings rather than going to a mechanic, but if you do so, use caution — the bearings may be small, but they’re very important.

How do you check wheel bearings while driving?

You can test this by gently swaying your car while driving slowly. If the noise lessens when you sway right, then the damaged bearing is likely on a left wheel bearing. If it lessens when you sway left, a right wheel bearing is likely broken.

Can you replace a wheel bearing without replacing the hub?

On some cars, you can just replace the bearing and call it a day. On others, the hub assembly must be removed and replaced. The most difficult type involves removing the hub assembly and setting it in a press. If you’re not sure what type of wheel hub assembly you have, stop by or give your local Pep Boys store a call.

How often do wheel bearings need replaced?

about 85,000 to 100,000 miles
Most serviceable wheel bearings need maintenance every 25,000 to 30,000 miles, or during every brake service. But, the average life of a sealed wheel bearing and hub assembly is about 85,000 to 100,000 miles, without the opportunity for a technician to repack the bearings.

What causes noisy wheel bearings?

What causes wheel bearing noise? Over time these bearings can become loose or worn. This wear will be accelerated if the grease has leaked out or dirt, grit or water have found their way inside. The first time you may know you have a problem is at a service or MoT test.

How much is a wheel bearing hub assembly?

The average cost for wheel hub assembly replacement is between $408 and $522. Labor costs are estimated between $112 and $141 while parts are priced between $295 and $381. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How many wheel bearings does a car have?

4 wheel bearings. 3 engine distribution bearings: 1 bearing for each of the 2 idler rollers, 1 for the water pump. 2 bump stops-suspension bearings (MacPherson) 2 seat adjustment bearings (roller freewheels for height adjustment)

What does it sound like when a wheel bearing is going out on your vehicle?

The most common and often most-identifiable symptom associated with a bad wheel bearing is noise coming from the wheel or tire area of the moving vehicle. You may mistake this as engine noise, but when you listen closely you are likely to hear grinding or grating that gets louder as the vehicle accelerates.

What does a blown wheel bearing sound like?

A bad wheel bearing sound is usually a loud hum coming from that wheel sort of like loud road noise from bad tires. A similar noise can come from worn bearings in your transmission or even a low transmission fluid level.