Which topology uses a switch or hub to connect to all devices in the same network
Which topology connects all devices to each other?
Summary
| Topology | What it is |
|---|---|
| P2P | The network consists of a direct link between two computers |
| Bus | Uses a single cable which connects all the included nodes |
| Ring | Every device has exactly two neighboring devices for communication purpose |
| Star | All the computers connect with the help of a hub. |
•
Feb 5, 2022
What network topology is a switch?
star topology
A switch provides a star topology. This last claim cannot be made for the shared-media networks discussed in the last chapter. For example, it is impossible for two hosts on the same 10-Mbps Ethernet segment to transmit continuously at 10 Mbps because they share the same transmission medium.
Which topology used hub as a network device?
star topology
In star topology, every peripheral node (computer workstation or any other peripheral) is connected to a central node called a hub or switch. The hub is the server and the peripherals are the clients.
How does a hub differ from a switch?
KEY DIFFERENCES
A Hub is a networking device that allows you to connect multiple PCs to a single network, whereas a Switch connects various devices together on a single computer network. A Hub operates on the physical layer, whereas Switch operates on the data link layer.
What is hub in computer network?
A network hub is a node that broadcasts data to every computer or Ethernet-based device connected to it. A hub is less sophisticated than a switch, the latter of which can isolate data transmissions to specific devices. Network hubs are best suited for small, simple local area network (LAN) environments.
Which network topology needs a switch or hub?
Star topology
Star topology is a network topology where each individual piece of a network is attached to a central node (often called a hub or switch). The attachment of these network pieces to the central component is visually represented in a form similar to a star. Star topology is also known as a star network.
Why use a hub over a switch?
In that situation, hubs have a particular feature that is important for network diagnostics, making a hub a better option than a switch. Because Ethernet hubs operate at one speed and only at half-duplex in what is called Shared Ethernet, they do not understand the concept of station addresses.
What is switch and hub in networking?
A Hub is a networking device that allows one to connect multiple PCs to a single network. Hubs may be based on Ethernet, Firewire, or USB connections. A switch is a control unit that turns the flow of electricity on or off in a circuit.
What is switch router and hub in networking?
A switch transmits data from one device to another in form of frames while a router transmits data from one network to another in form of packets. A hub transmits data from one device to another in form of binary bits.
Why are hubs still used?
Hubs can still be useful in special circumstances: For inserting a protocol analyzer into a network connection, a hub is an alternative to a network tap or port mirroring. A hub with both 10BASE-T ports and a 10BASE2 port can be used to connect a 10BASE2 segment to a modern Ethernet-over-twisted-pair network.
What are types of hub?
There are three types of the hub that are given below:
- Passive Hub.
- Active Hub.
- Intelligent Hub.
Can a switch be used as a hub?
In most cases, a network switch performs the same as a hub. They are both able to transmit data from one computer to another. For an Ethernet switch, it is sometimes called a hub. In other cases, some people prefer to use these two terms to refer to a box for their similar appearance.
What does a switch do in a network?
Switches enable fast in-network communication by routing data packets between devices in a smart way, creating a tunnel between source and destination that can’t be interrupted by other network traffic.
Is a hub the same as router?
A router is a more sophisticated device with both hardware and software that is used to connect multiple area networks (LANs and WANs), or two or more logical subnets. See also Hub vs.
…
Comparison chart.
…
Comparison chart.
| Hub | Router | |
|---|---|---|
| Device Type | Passive Device (Without Software) | Networking device |
| Used in (LAN, MAN, WAN) | LAN | LAN, MAN, WAN |
What is the difference between a switch and a hub quizlet?
A hub is a physical layer device, and a switch is a data link layer device. A hub causes larger collision domains. A switch remembers which devices are connected on each interface, while a hub does not.
How do I connect a network switch?
How is a hub a router and a switch different from each other explain in terms of broadcast domain?
All ports on a hub or a switch are by default in the same broadcast domain. All ports on a router are in the different broadcast domains and routers don’t forward broadcasts from one broadcast domain to another.
What is the purpose of the hub and switch quizlet?
Hub and switch are both used to connect a number of devices to form a LAN. But switch does more efficiently. Switch learns the location of the devices that they are connected to almost instantaneously.
Which port on switch connects to router?
It’s common to use port 1 to connect to the router providing Internet access, and the other ports for devices.
How do I connect a switch to my computer?
Connect Ethernet cables to the other computers that need to be networked together. Plug the other end of the cables into any of the open numbered ports on the networking switch. On those computers, repeat the setup process of connecting to the switch by going through the “Network and Sharing Center” menu.
Can you plug Ethernet into switch?
While the Switch does not support an on-board Ethernet Port, it is possible to set up a hard-wired internet connection on your Switch dock. It requires players to purchase a LAN to USB adapter, available from many retailers.
What are the ways to connect two hubs switches together?
In the absence of an uplink port, you can connect two hubs or switches together by using MDI-X ports, but you must use a crossover cable to do so. Hub Ports Instead of having a dedicated uplink port, some switches and hubs have a port that you can change between MDI and MDI-X by pushing a button.