What hooks do you use to hang patio lights?

One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence.

How do you hang patio lights with posts?

How do you hang patio lights without drilling holes?

The best ways you can hang patio lights without nails is using gutter hooks, adhesive hooks, clear tape with a strong and reliable hold, using a hot glue gun, or staples to hang the lights. Other methods include zip ties, wrapping the lights around pot plants, or attaching them to the trees.

How do you hang heavy string lights?

How to Hang Outdoor String Lights
  1. Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. …
  2. Step 2: Mount Screw Hooks. …
  3. Step 3: Connect & Tighten Cable. …
  4. Step 4: Attach Your String Lights. …
  5. Step 5: Sit Back and Enjoy!

How do you hang lights with Command Strips?

How do you install deck string lights?

Instructions
  1. Determine how many poles you will need. We used two – one on each of the farthest corners of the deck. …
  2. Paint or stain the wood poles to match the deck. Allow to dry.
  3. Attach poles to the deck. Using wood screws, attach each pole to the back of the deck. …
  4. Add hooks. …
  5. Attach string lights.

Are there Command Strips for outside?

Commandâ„¢ Outdoor Refill Strips make it easy to reuse your Commandâ„¢ Outdoor Window Hooks time and time again. These clear strips are specially designed to hold strongly on outdoor windows they are water resistant, UV resistant, and can handle temperature extremes from 20 degrees F to 125 degrees F!

Will Command strips stick outside?

Yes you can with Command™ Outdoor Products. The adhesive should be applied to a clean, smooth, dry surface when the temperature is above 15°F (-9°C). The products hold strongly down to -20°F (-29°C).

Will Command strips hold LED lights?

Be careful not to oversaturate and water damage your LEDs. From here, you can select a new adhesive. This could be more W3 tape, extra-strong double-sided tape, Command strips, glue dots, or adhesive clips. The possibilities are endless.

What are the strongest Command Hooks?

Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Commandâ„¢ Adhesive, Commandâ„¢ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more.

How do you hang Command hooks outside?

Are Command Hooks permanent?

Command Hooks are great for temporarily hanging things for the holidays, like string lights, stockings or a wreath on your front door. But the rest of the year there are a number of ways in which you can use those plastic hooks more permanently. Here’s a bunch of things you should be using Command Hooks for!

How much weight can Command hooks actually hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

Are Command hangers good?

These sticky Velcro strips will cost a little more than nails, but they do their job and leave your walls completely smooth with no holes or residue left behind. The result is a beautiful, securely hung picture and a wall in pristine condition. What is this? So yes, Command Picture Hanging Strips are worth it.

Are there Command hooks that hold 20 lbs?

Command Strips20 Lbs | Bed Bath & Beyond.

Why do my Command strips keep falling?

Make sure to remove any dust and debris from the wall with rubbing alcohol before trying to apply the command strips. If you don’t do it, the chances are that the strips will fall off the wall shortly after being attached.

Can you use Command strips horizontally?

Should Commandâ„¢ Picture Hanging Strips be used vertically or horizontally? They can be used either direction. However, best to use vertically for optimal performance and removal.

How do I make my Command strips hold weight?

If the hook base is wide enough for it, the instructions usually indicate to put strips side by side, and also indicate it can hold double the weight on the hook packages. Perhaps this is obvious, but you can NOT double the weight by layering two strips. 11 of 11 found this helpful.

Why won’t my Command hooks stay?

Any dust, dirt, or residue can make it hard for the adhesive to form a strong bond. I recommend cleaning the area with a Magic Eraser, because it’s quick and easy, and will thoroughly clean most surfaces. After using the Magic Eraser, wipe the area with rubbing alcohol to leave it squeaky clean.