How do you reset anti-theft-deterrent?

Turn on the car ignition by inserting the car key into the car’s ignition. All the accessories of the car are activated except the engine. If the car’s anti-theft light is not blinking, allow the system to reset itself. The resetting is done by turning the key to the off position and resting there for some minutes.

Why is my theft-deterrent light on?

In most cases, the security light means that the car no longer recognizes the key you’re using, so you may be able to bypass the problem by using a different key. If a second key doesn’t fix the issue and the light is still on, call a trusted mechanic to help you identify the issue and reprogram the anti-theft system.

What triggers theft-deterrent system?

The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) Tilt/inclination.

Will disconnecting battery reset anti-theft?

It is another way to solve the problem of anti theft system car wont start. Disconnect the positive terminal of the battery for a minute or two. Reconnect it and make sure that both the anode and cathode terminals are tightly attached. It will reset the computer system and your car is likely to kick off.

How do I get my car out of anti-theft mode without remote or key?

Disabling the Alarm Without a Remote
  1. Insert your key into the car’s ignition and turn the key to the “ACC” position.
  2. Locate the transmitter system for your alarm. …
  3. Repeatedly press and release the toggle switch on the system.

Is there a fuse for anti-theft system?

You can find the alarm fuse in the panel. Look in the owner’s manual to find the exact location of the fuse used by the security system. While the fuse is out, the car is not going to start. However, you can reinsert it and hopefully reset the alarm.

Will disconnecting battery reset car alarm?

If you’re still having trouble with the alarm, disconnecting your car’s battery may be the next best option. This will both silence the alarm and reset it—or at least it should. You may also want to refer to your owner’s manual for the location of the alarm’s transmitter system.

How much does it cost to reset anti-theft system?

Reprogramming can only be done by a dealership technician using a factory scan tool, or by an authorized locksmith if you can find one who can do computer keys. The typical charge for this may be $75 to $150 depending upon how long the procedure takes.

What does service theft deterrent mean?

A theft-deterrent system is basically a set of sensors in and around the car, and a response system. The sensors can detect if the car is bumped, if someone tries to open the door without the key, or if the car is moved.

Is the anti-theft light supposed to blink?

The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.

How do you bypass a car alarm?

What does service deterrent system mean?

The Servicegard universal theft deterrent system prevents unauthorized use of your vehicle by disabling the vehicle starter, fuel, or ignition system. To operate the vehicle, you must first disarm the system simply by pushing the disarm button on the remote transmitter.

How do you reset the theft deterrent on a 2014 GMC Sierra?

Begin by using your original key fob to unlock your truck doors. Then, open the passenger-side door and manually re-lock the vehicle using the switches on the inside of the passenger-side door. Finally, close the doors, and your system should be reset.