How do I reset my Seagate GoFlex?

Power the drive off using the power button on the side of the drive. Wait for the drive to be complete powered off, then wait about 30 seconds. Power the drive back on. Once the WiFi LED is on and solid, the drive should be reset and ready to go.

How do I access my GoFlex Home without software?

GoFlex Home can be connected to the Internet via a network. You can set up the GoFlex Home either by installing the Seagate Dashboard software or by typing http://goflex_home and pressing Enter in the address bar of your web browser.

How do I log into my Seagate GoFlex Home?

Connect the GoFlex Home to a network with Internet access. Setup the GoFlex Home either by installing the Seagate Dashboard software or by opening up a web browser and typing http://goflex_home and pressing Enter in the address bar.

How do you open a Seagate GoFlex?

How do I setup my Seagate GoFlex Home?

Connect the GoFlex Home drive dock to the Wi-Fi router by using the provided Ethernet cable. 2. Pop the GoFlex hard drive into the GoFlex drive dock and plug the power supply into the drive dock and the wall outlet. Switch on the GoFlex Home by pressing the Power button on the drive dock.

How do I access my GoFlex drive?

Double-click the GoFlex icon on the desktop (it may take a minute for the icon to appear). Double-click the Mac Install.
…
Connecting to a Windows computer:
  1. Connect the drive to the computer.
  2. Open (My) Computer to access the GoFlex drive.
  3. Drag files to the GoFlex drive (see Document ID: 206419 for more information).

How do I connect my GoFlex Home directly to my computer?

Either use a USB cable or a SATA cable. No since in using an adapter when your computer should have the ports for it. Because the GoFlex Home is a NAS connected on Ethernet. Once you unplug it from the base unit, it has a SATA power/port – which you need a ATA/USB adapter kit to directly connect on USB to PC.

How do I access my Seagate external hard drive on Windows 10?

Double-click to open (My) Computer/This PC. Look for the Seagate External drive in (My) Computer/This PC. It will be a drive letter, like E: or F: (unless you have changed it). Double-click on the external drive.

How do I use my GoFlex external hard drive?

How do I delete files from freeagent GoFlex drive?

Right-click on the drive in Explorer, choose format and when you get the prompt for quick vs full format, select full. A “quick format” simply erases the root file system structures but leaves the data otherwise intact.

How do I reset my Seagate external hard drive?

Reset using the button
  1. Power down the Seagate Central by unplugging it from power.
  2. Wait approximately 15 seconds.
  3. Power up the Seagate Central again.
  4. Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes. …
  5. Wait until the light becomes solidly illuminated.

How do I reset my Seagate external hard drive Windows 10?

Reformatting a drive on Windows
  1. Leave the Allocation unit size as Default.
  2. The Perform a quick format box should be Checked.
  3. The Enable file and folder compression should be Unchecked.
  4. Click OK then click OK at the Formatting warning window.
  5. The volume displays Formatting.

Does Seagate GoFlex work with Windows 10?

Seagate has evaluated current product lines to determine which ones will be supported in Windows 10. Older drives that are not listed here may work, but have not been tested.
…
Will my Seagate drive work with Windows 10?
ProductHardwareAdditional Information
GoFlex HomeYesUse File History to back up to this drive. Remote access removed on 2/28/19.

How do I restore my external hard drive back to factory settings?

Click the Go menu, select Utilities from the drop-down menu, and open Disk Utility. Choose your external drive from the left sidebar, and click Erase. Give your drive a name and select the file system you want from the Format drop-down. Click Erase, and the system will reformat your drive.

Why is my Seagate external hard drive not being recognized?

A reason why your Seagate portable drive is not being recognized could be that you might have plugged it into a faulty or loose USB port. Try to plug the drive into a different USB port and see if it is recognized.

How do I fix my external hard drive that won’t read?

External Drive Not Showing Up or Detected? 6 Fixes to Try
  1. Make Sure Your External Drive Turns On. This is a preliminary step, but still one worth checking. …
  2. Check the Drive in Disk Management. …
  3. Try Another USB Port and Computer. …
  4. Troubleshoot Device Driver Issues. …
  5. Create a New Drive Volume. …
  6. Format the External Drive.

What does a blinking hard drive light mean?

Hard Drive Light Keeps Flashing On and Off

Windows will often wait until your computer is idle before running specific tasks, which means you may see the hard drive activity light flashing even while you’re not actively doing anything.