Can you machine wash owlet sock?

Owlet recommends hand washing your fabric sock and sensor every 2 weeks at a minimum to avoid skin irritation caused by a soiled fabric sock and sensor. Gently hand wash the fabric sock and sensor using cool to lukewarm water and a mild detergent.

How do you wash an owlet 2 sock?

Owlet Baby Care
  1. Remove your sock sensor.
  2. Gently handwash the sock using cool to lukewarm water and a mild detergent once a week.
  3. Lay or hang the fabric socks to dry. Make sure the sock and your baby’s foot are completely dry before use.
  4. Never submerge any electronic. We Want To Be There For Every Milestone.

Can owlet sock get wet?

Lay the sensor on the towel and air dry until completely dry. CAUTION! Do not place a wet sensor on the charging station as sensor failure can result. Never use a wet or damp sensor on your child’s foot.

How do you reconnect an owlet sock after washing it?

Turn the Base Station over and you will see two buttons – one small rectangular button, and one large round button – press the small rectangular button three times, within 3 seconds. The unit should chirp/beep. Press the large round button twice within 2 seconds. The unit should chirp/beep again.

How do you turn off owlet sock 3?

Chelsey
  1. Unplug the base station and remove the sock.
  2. Press and hold the base station button while you plug the base station back in. …
  3. Quickly press the base station button once (1). …
  4. If successful, the Sock light on the bottom of the base station will not be illuminated and the sensor light on the sock will turn off.

Can you put a sock over the owlet?

To keep the sock on your little one’s foot, you can put them in footed pajamas or put an every-day sock over the Owlet Smart Sock.

Can Owlet connect to 5G?

The Owlet Base Station, like many devices, cannot connect to 5G WiFi networks, hidden networks, or cellular networks. Most WiFi-enabled mobile devices have built-in preferences to remember wireless networks.

Why does my Owlet sock keeps disconnecting?

Body Blocking

The Base Station and Smart Sock can disconnect when your body blocks the sock signal. To reduce disconnection, only use the Owlet Smart Sock when baby is in their crib alone.

Does it matter what foot the Owlet goes on?

The answer is Yes! Your Smart Sock was designed to work on either the right or left foot. If used on the right foot, the sensor dome should be on the top of the foot.

How do I pair my Owlet sock 3?

Pair the new Owlet Smart Sock to the Base Station
  1. Flip the Base Station over.
  2. Quickly press the small, rectangle button three times (3x) within 3 seconds. You should hear a beep or chirp.
  3. Quickly press the big, round button twice (2x) within 2 seconds and then wait for a chirp or beep. It should be paired!

Why is my Owlet sock 3 not connecting to Base Station?

The correct Wi-Fi password is being used. You are connecting to a 2.4g Wi-Fi (5g is not compatible.) Verify your internet is working by browsing a website on another wireless device connected to your home Wi-Fi. Solution: Reboot the router and modem, or contact your internet provider.