How long is a bicycle chain link
How long is a link in a bike chain?
One pair of inner and outer plates, one inch long (i.e. one link, often referred to as “two links” as the picture shows:) ). For bicycles that have more than one front chainring, i.e. those with a front derailleur.
What size chain link do I need for my bike?
If your bike is equipped with the derailleur, you need a 3/32″ or 11/128″ chain. If you have a single-speed or internally geared bike, you need either 1/8″ or 3/32″. You should get the correct size, but if it is not possible, you can get the 1/8″ because it has limited compatibility with the 3/32″ sprocket.
How do you measure a link on a bike chain?
How long is a single chain link?
One link is a hundredth part of a chain, which is 7.92 inches (20.1 cm).
How do I know my chain length?
What size chain is bicycle chain?
Chains come in 3⁄32 in (2.4 mm), 1⁄8 in (3.2 mm), 5⁄32 in (4.0 mm), or 3⁄16 in (4.8 mm) roller widths, the internal width between the inner plates. 1⁄8 in (3.2 mm) chains are typically used on bikes with a single rear sprocket: those with coaster brakes, hub gears, fixed gears such as track bicycles, or BMX bikes.
What is a link measurement?
The link (usually abbreviated as “l.”, “li.” or “lnk.”), sometimes called a Gunter’s link, is a unit of length formerly used in many English-speaking countries. In US customary units modern definition, the link is exactly 66⁄100 of a US survey foot, or exactly 7.92 inches or approximately 20.12 cm.
How do you measure the width of a bicycle chain?
It is measured by measuring the distance between 3 links, then dividing it by two.
- Chain pitch is shown with green markers, though it is determined by measuring the distance between 3 adjacent pins (blue mark) and dividing it by two.
- Inner chain width, marked with blue arrows and lines.
- From left to right:
How long is a 116 link bike chain?
One link is two pin-to-pin dimensions. Each pin is 1/2″ from its neighbor, so a full link is 1″ long. When they say the chain is 116 links, they are really saying there are 116 pins, for a chain length of 58 inches.
Are bike chains universal?
All modern bicycle chains are made to the “one-half inch pitch” standard, meaning from rivet to rivet is nominally 0.5 inches. The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable.
Are 11 speed and 12 speed chains the same?
Is 114 links long enough?
In most cases it will be long enough. I have used a 114 link chain with 34/50 and 11-40 cassette on 422mm chainstays. setup is 34×50 chain rings.
How long is a 120 link bike chain?
The easy answer to this question is the # of links of the chain can be determined by counting each pin. Therefore a 120 link bike chain (with 1/2″ pitch) will be 60″ (which is 5 feet) long.
How long is a 110 link bike chain?
55 Inches
Description. Product Description: Chain size is 415H x 110 links (55 Inches) long (55 outer plates).
How many links should a 11 speed chain have?
The 11 speed Shimano comes with 116 links. Just make sure you get a 12 speed chain for a mountain bike. The Shimano XT CN-8100 12 speed chain comes with 126 links. Buy it.
How many links does a Shimano 105 chain have?
This new Shimano Ultegra comes with 116 links, the standard length. Most modern road bikes will require five or six links removing, depending on chainstay length and gearing. Some Shimano 10-speed chains are directional and must be fitted with the Shimano logos on the outward face of the links.
How many links should a 9 speed chain have?
Generally 6-7-8 speed chains are the same and 9 speed are thinner, more than 9 speed is a bit specialized. The length isn’t as important because you will usually have to shorten the chain to fit your bike. The standard chain is 114 pins (56 links) but you almost never need to know this ( I had to look it up!).