Where is the receiver in a Hunter fan?

The remote receiver is connected between the electrical connector coming from the fan and the electrical connector coming from the hanger bracket terminal block. See Figure 2. Slide the remote receiver through the two rectangular openings in the hanger bracket and center it in the hanger bracket, as shown in Figure 4.

How do I reset my Hunter fan receiver?

Turn the power to your fan off for 5-10 seconds and then back on using the wall switch. Press and hold both the ‘FAN’ and ‘LIGHT’ buttons for at least four seconds. This step should be done within three minutes of restoring power to the fan.

How do you replace a ceiling fan receiver?

How do you reset a ceiling fan remote receiver?

There are several ways to reset a ceiling fan remote, but here’s the most straightforward: With the power off, hold down the button until the light on the remote flashes. Then, press and hold it again for 15-30 seconds to resynchronize the remote with your fan.

Why is my Hunter ceiling fan not working?

Probably causes are a faulty light kit, the fuse in the light kit has blown, a faulty wall or remote control which could be either the handset or receiver, broken or faulty light switch or just incorrect installation.

Why is my Hunter ceiling fan remote not working?

Perhaps the most common cause for a ceiling fan remotes not working is either a lack of batteries or dead batteries. If your remote control has an indicator light, check to see if it comes on. If it doesn’t, that’s a good sign that it has a battery problem. Open the remote control battery cover.

How do you change a Hunter fan remote?

How do you pair a Hunter fan remote?

How do you use a Hunter fan remote?

Are all Hunter fans remote compatible?

Hunter fans that come with pull chains are compatible with either a handheld remote or a wall control that mounts inside the wall switch. Our most popular handheld remote is the 99122 and most popular wall control is model 99375. Each of these models includes the receiver unit as well.

Will ceiling fan work without remote?

Things You’ll Need

To control a remote-controlled ceiling fan without using the remote, add a pull cord to the pull switch on the motor module. The pull cord can be purchased from a hardware store or garden and patio shop, while the tools needed are already in most households.

Do Hunter fans have remotes?

Enjoy comfort and convenience with ceiling fans with remotes from Hunter. Shop our selection of remote control ceiling fans with lights or without.

Where is the model number on a Hunter fan?

Can I add a remote to any Hunter ceiling fan?

Adding a universal remote control to your Hunter Fan allows you to easily adjust your fan’s speed, lighting, and more from anywhere in the room. And with our easy-to-follow instructions, you can install your remote control in minutes! Visit HunterFan.com to find a Universal Remote Control for your fan.

Do universal remotes work on all ceiling fans?

The switch positions on both ceiling fan remote units must match. There are many “universal” ceiling fan remote control kits on the market for overhead fans controlled by pull chains and a singe wall switch. All of them feature on/off and fan speed control.

How do I identify my ceiling fan model?

You will find the model number for all fans on the:
  1. Part guide or installation manual that came inside your ceiling fan box.
  2. Outside of the box.
  3. On the fan itself. Location depends on the type of fan: For Downrod-mount fans- ID sticker located on top of the motor housing (facing the ceiling of an installed fan).

What is the warranty on a Hunter ceiling fan?

Motor – Limited Lifetime Warranty

If any part of your ceiling fan motor fails during your ownership of the fan due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide you with a replacement fan free of charge.