When should you stain a new deck?

You can stain a new deck immediately after installing your deck, but this is not the best time to do it and here’s why: the lumber is still too wet. The best time to stain a new deck is 3 to 12 months after installing it.

What happens if you stain a new deck too soon?

Staining too soon can lead to the stain not being absorbed by the wood and result in a patchy and failed upgrade for your deck. Make sure the wood has dropped all of the excess moisture before trying to apply stain. Test to make sure that water is absorbed by the wood which ensures this drying process is done.

When Can I stain and seal a new deck?

The wood on a new deck needs to dry thoroughly before sealing or staining. If the wood came still wet with preservative, allow it to dry about 30 days before applying stain or sealer. To test the wood to see if it’s dry enough to stain or seal: Pour a little water on the wood.

How do I know if my deck is dry enough to stain?

To determine if pressure treated wood is dry enough to stain, try the “sprinkle” test. Sprinkle water on the wood: if the wood absorbs it within 10 minutes, plan to stain as soon as possible. If the water beads or pools on the wood surface, the wood needs more time to dry.

How do I stain my new deck for the first time?

Stain New Deck Right Away.

Apply a wood deck cleaner and thoroughly scrub and or pressure wash lightly. Neutralize with a wood brightener. These two steps will remove the mill glaze and “open” the wood pores. Apply a deck stain that is “thin” in viscosity.

What temperature should it be to stain a deck?

To assure the highest quality results from your staining work, closely follow these guidelines: Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first.

How many coats of stain should you put on a deck?

two coats
Whatever type of stain you use, apply two coats to ensure there are no missed spots and to get a more uniform finish.

How long does deck stain need to dry before rain?

24-48 hours
While latex or water-based stain will be dry in about 4 to 6 hours, your freshly stained deck needs at least 24-48 hours before it rains. Oil-based stains that usually dry in about 12 to 24 hours will require a minimum of 48 hours before the rain.

How long does deck stain take to dry?

4-24 hours
With the temperature above 60 degrees, an oil-based deck stain typically dries in 4-24 hours. Most can take rain within 12 hours though as water will not “wash” out the oil stain from the wood. Wait 24-72 hours for full cure before walking on the deck and replacing furniture.

Can you use a roller when staining a deck?

Short Answer, Yes. But there are some other things to consider when using rollers or sprayers. Rollers are a great way to apply wood stain as well for the speed at which you can apply the stain. However, when using rollers can be a disadvantage when you have hard to reach areas.

How long should deck stain dry before second coat?

24 – 48 hours
For best results, avoid staining at midday or in direct sunlight. If a second coat is required, wait 4 hours between applications. Depending on temperature and humidity, allow 24 – 48 hours of dry time before using your beautifully restored deck or porch.

Can you stain a deck over multiple days?

Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. Extreme heat or sun can work against you when you are staining your deck.

Should I pressure wash my deck before staining?

Taking your time is key to power washing a deck successfully. Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper.

Is it better to brush or roll stain on a deck?

You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. If you see that too much wood stain has been used in an area, use a roller or brush to fix the imperfections.

What is the best way to apply stain?

Stain can be applied with a bristle brush, a foam brush, or a cloth. On woods with large, open pores, such as oak, mahogany and ash, increase your pressure to work the stain into the pores. Rubbing or brushing against the direction of the grain will help fill deep pores with stain.

Is it better to sand or power wash a deck?

DO sand your deck before sealing.

At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.

Can you put stain over stain on a deck?

Can I stain over a stained deck? If your deck is in good condition and you’re looking to apply a maintenance coat to keep your deck looking new, then yes… you can stain over a stained deck. It’s the same if the surface of your boards are starting to look really worn and faded. Applying more stain won’t hide the damage.

What happens if it rains on a freshly sanded deck?

It’s important that you make sure there is no chance of rain when you begin to sand. If the wood gets wet after it’s been sanded, but not before you’ve had the chance to stain or paint it, you’ll be back to square one — you’ll need to wash and sand it all over again.

How long do you let a deck dry after power washing?

After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.

Do you sand or clean deck first?

It is important, to begin with, a power sander and always finish by hand to reach difficult areas. Remember no more than 60 or 80 grit paper. The next step is to clean the wood thoroughly after the sanding. Deck cleaners, also known as deck wash are used to lift dirt and unsightly mildew which accumulates over time.

How long stay off deck after staining?

Stained decks should be left to dry completely for at least 24 hours before putting furniture on them. This will ensure it is cured completely and won’t affect the newly applied finish.