How much does a claw foot cast iron bathtub weigh?

200-400 pounds
How heavy is a clawfoot tub? All bathtubs are heavy, but clawfoot tubs tend to be especially heavy – particularly the cast-iron models. A cast-iron tub can easily weight 200-400 pounds while empty – fill it with water and climb in and you’re looking at several hundred pounds of weight.

How much does a cast iron bath weigh?

between 240 and 500 pounds
Cast iron bathtubs typically weigh between 240 and 500 pounds; however, the actual weight depends on the size and type of bathtub. Alcove cast iron bathtubs are usually 60 inches long, hold 32 gallons of water, and weigh 320 pounds on average.

What is a cast iron claw foot tub worth?

Interestingly, most antique clawfoot tubs that you can find for sale have already been refurbished, and so they’re a little more expensive than an untouched tub is going to be. For example, a restored 5′ clawfoot tub was sold for $1,000, and a refinished 6′ clawfoot tub from 1926 sold for about $2,500.

How do you move a clawfoot tub?

Work your way around the tub, lying the tub down gently on the moving blanket after each foot is removed. Wrap the moving blanket(s) all the way around the tub and secure with packing tape or duct tape. Make sure the tape doesn’t touch the tub itself, as it may leave residue that is difficult to remove.

Can you break a cast iron tub?

Can my floor support a cast iron tub?

Both floor systems are normally strong enough to support the weight of a cast-iron bath filled with water, and a person. If you’re concerned about the strength of the floor you could ask a professional to check and reinforce it for you.

How do you move a heavy cast iron tub?

How do you lift a heavy bathtub?

Can I put a clawfoot tub on tile?

You are fine installing a claw-foot iron tub on porcelain tile as long as you place the tub carefully. If you drag the tub across the tile you run the risk of scratching the porcelain if it’s a lower quality.

What holds a cast iron tub in place?

Can you put a cast iron tub upstairs?

In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem.

How heavy is a bathtub?

Plastic bathtubs can weigh as little as 50 pounds empty, while a cast-iron bathtub can top 1,000 pounds.

What can I do with an old cast iron bath?

The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations.
  1. Turn it into a planter in your garden. Are you a gardener? …
  2. Transform it into a chaise lounge. Your old bathtub can have a new use in a room besides your bathroom. …
  3. Upcycle it into a chair. …
  4. Turn it into an outdoor pond.

Can you cut a cast iron tub with a Sawzall?

The easiest and most versatile saw for this type of cutting is the reciprocating saw or “sawzall”. Blades are available up to nearly a foot in length, making it easy to cut most anything. Just don’t cut through the floor or your plumbing! Start with two cuts across the width of the tub, dividing the tub into thirds.

How do I know if my tub is cast iron?

1) Remove the overflow cover and popup lever from the head end of the tub and look at the edge of the hole. You should see black cast iron or bright steel. Also, if you remove the overflow cover, the material between it and the plumbing will be about 1/4 ” thick if it is cast iron.

Is it worth refinishing a cast iron tub?

The cast iron tub refinishing procedure also known as cast iron tub reglazing, not only is a viable alternative to replacement when the tub is old, stained, damaged, or simply doesn’t look good anymore but has become the number one choice for contractors nowadays when they are hired by a homeowner to remodel a bathroom …

How much does it cost to restore a cast iron bath?

How much does it cost to refinish a cast iron tub? For an average cost of $350 to $500—a fraction of the $1,200 to $5,000 expense of a new cast-iron or steel tub installed—refinishers can make an antique fixture look brand new.

Can you sandblast a cast iron tub?

Restoration begins by sandblasting the exterior of the tub to remove old paint and rust. The exterior of most tubs is rough, exposed cast iron. You can choose to leave it in its rough, natural condition or have it filled and sanded smooth, which allows for a glossy exterior.

How do you’re enamel a cast iron tub?

Can you spray paint a cast iron tub?

Painting is prone to being messy and taking some time to dry due to oil-based paints. Cast iron can be painted with spray paint too.

Can I Reglaze my bathtub myself?

Whether you have your tub refinished by professionals or recoat it yourself, all the work is done on-site. Surrounding materials, including tile, flooring, and all of the other elements, are masked off and left in place as the resin coating is applied.

How much does it cost to re enamel a tub?

$350 to $600
Painting enamel onto a bathtub costs $350 to $600. Most cast iron units have an enamel coating that can chip or crack. Much like reglazing, this process includes sanding the surface and applying paint in a color of your choice.