Why won’t my AfterShokz won’t pair?

Your headphones just need to be reset. 1) Start with your headphones powered off and cleared from your devices’ Bluetooth settings. 2) Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. Your headset will turn on (continue holding the button) and then the LED light will flash red and blue.

How do you put Trekz AfterShokz in pairing mode?

Press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery. Enable the Bluetooth® settings on your device and select “Trekz Titanium by AfterShokz”.

Why won’t my Trekz air connect?

If you encounter issues where you can’t seem to pair and use your bone conduction headphones you may want to just do a reset on them. This way they can start fresh and then you can pair them as usual again to listen. Enter pairing mode – Press and hold the volume+ button for 5-7 seconds.

How do I reset my Trekz air?

Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You’ll hear beeps and/or feel vibrations. Turn your headphones off. Your headphones are now reset and can be re-paired to your device.

How do I connect my AfterShokz to my macbook air?

To enter pairing mode, press and hold the volume+ button for 5–7 seconds. You will know you are in pairing in mode when the LED light flashes red and blue, and the voice prompter Audrey says, “pairing.”

How do I switch between devices in AfterShokz?

Hi there – AfterShokz here. Your headphones will always default to play on Device 1 when you’re paired to numerous devices. To play on Device 2, just hit play on that device and it will switch.

Why are my AfterShokz blinking red and blue?

The headphones are in pairing or discovery mode

This puts the headphones in pairing mode, which makes the status lights blink red and blue. The solution is to pair your headphones with the other device again.

Where is the multifunction button on Trekz Air?

What is the Multifunction Button? All AfterShokz wireless Bluetooth headphones include a multifunction button. It can be located on the outside of your headphone’s left transducer. Simply run your finger along the transducer while wearing AfterShokz and you’ll feel it!

How do I connect my AfterShokz headphones to my Iphone?

Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Audrey will say “Welcome to AfterShokz.” 3. Continue holding volume+ until the LED light flashes red and blue.

How do you pair left and right earbuds?

-Press and hold the button on the LEFT earbud, and count to 2 or 3 until the light turns blue. -While continuing to hold the button on the left, press and hold the button on the RIGHT bud. -Now just hold together for another 10-15 seconds. Both will flash red/blue.

What does it mean when your Bluetooth is blinking blue?

The blinking blue light means that the speaker is connected to a Bluetooth device. If it’s not connected to the one you are using check others that are in the area and make sure it did not connect to those.

Why are my Bluetooth headphones not connecting?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.

How do I get my Bluetooth earbuds to work?

Place each earbud on the desk in front of you and hold down both for 8 seconds until they turn off. Place in cradle for a couple of seconds. Take them out of the cradle. Hold down on both until they turn on, they should be flashing.

How do you activate both earbuds?

Why is only one of my wireless earbuds connecting?

Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds.

Why wont both my earbuds connect?

Double press both the left and the right earbuds simultaneously to sync them manually. NOTE: if it doesn’t work the first time, try it again. When the earbuds are synced the left earbud’s LED will blink Red/Blue which means it is in paring mode. Replace earbuds in charging case.

Can’t connect both earbuds?

Step 1: While the headphones are charging (the white LED indicator of earbuds is on), double-press the power keys of both sides to reset the headphones. Remove both the headphones from charging case, then both headphones power on automatically and connect each other within 60 seconds.

How do you reset wireless earbuds?