How do you turn on an electric fireplace?

Electric fireplaces are designed to make life simple. They have no real fire, no smoke and no gas byproducts. In fact, all you have to do is plug yours into a wall outlet, just like you would any other appliance. Then, simply press a button to turn the fireplace on.

How do you manually start an electric fireplace?

How do you start an electric gas fireplace?

How do you turn on a electric fireplace with keys?

For fireplaces with a control panel, it’s as easy as turning the control knob to off. You should close or turn off the emergency gas valve. For those with a key valve, just insert the fireplace key into the slot and turn it until the valve closes. This cuts off the gas supply, and the pilot will go out.

How do you turn on an electric fireplace without the remote?

Flames can be controlled using the flame effect switch, which you must turn on if installed differently from the main power switch. You can use the flame dial to control the flame’s brightness, and you can use it to control how bright or dim the flames appear.

What does the pilot light look like?

A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip. The flame should strong enough to cover about 1/2 inch at the end of the thermocouple tip.

How do you start a fireplace with a key?

Lighting a Gas Fireplace With a Key Valve
  1. Place a long lighter next to the burner and pull the fuel trigger. (You can also use a lit match.) …
  2. Turn the key in the slot to open the gas valve. You may hear the hiss of gas entering the burner. …
  3. Replace the key cover.
  4. Use the key to control the height of the flames.

How do you start a fire in a fireplace?

Start by placing two pieces of firewood on the grate in your fireplace. Now crumple newspaper, which is your tinder, and place it between the firewood. Place the kindling on top. Add one or two more pieces of firewood on top of the other logs, and be sure to leave enough room for air to circulate around the logs.

Which way do you turn a fireplace key?

Insert the key back into the key hole to increase or decrease the height of the flame as desired. Turning the key counterclockwise increases the flame and turning it clockwise decreases the flame.

How do you operate a fireplace?

How do you start a fireplace without a key?

Are all fireplace keys the same?

Universal Valve Key for Gas Fire Pits and Fireplaces

Being universal, it works with both 1/4” and 5/16” socket sizes. Replace your old, lost, or damaged key with a new universal model.

What are the levers on my fireplace?

in your home are turned off when burning your fire. Also, some wood burning fireplaces have a lever to open or close the outside air vent to the fireplace. If your fireplace has this lever (usually located on the left inside panel) make sure the outside air vent is in the open (or up) position.

Is the damper open or closed?

Before lighting a fire, you can tell if the damper is open by placing your hand into the fireplace. If you feel a draft coming down the chimney, it is a good indicator that the damper is open. If you don’t feel any cold air coming down the chimney, it means that the damper is closed.

How do you light a indoor fireplace?

So lets start the fire!
  1. Ensure that all air vents in the fireplace are open. Put the logs on the bottom of the fireplace. …
  2. Add a layer of small logs of about 4 cm, and then one or two layers of kindling. Remember that air is important – approx. …
  3. Put a couple of firelighters on top of the layer of kindling wood. …
  4. Light it!

Do you open the flue all the way?

The damper should always be fully open before lighting a fire and when the fireplace is in use. Close it when it’s not it use. Operating the fireplace with the damper partially closed will not generate more heat. Instead, blocking the passage through the flue will result in smoke entering the home.

Why is there a vent in the bottom of my fireplace?

Bottom Air Vent – The bottom air vent on Old-Style Heatilator Fireplaces are where cool room air is drawn into the fireplace. The air is then routed around the firebox and exits through the top air vent where it returns to the room as heated air.

What is the knob on the front of my fireplace?

Different Types of Controls

Some chimneys have a knob that rotates a rod to adjust the damper. These knobs are generally found on the exterior of the fireplace, usually centered above the fireplace opening, but sometimes off to the side. If the chain or handle isn’t firmly secured in the bracket, the damper is open.

Is it OK to leave the flue open overnight?

The smoke from burning wood contains carbon monoxide, so in order to prevent this toxic byproduct from entering your home, it is important to leave the flue open overnight. This enables a draft to carry the compound out into the atmosphere, instead of sinking down the chimney and saturating the room.

What happens if flue is closed?

If you close the damper before that, you risk carbon monoxide poisoning. Functionally, this is what that means: Start your fire before you “need” it. Toward the end of the evening, let the fire die down instead of adding more logs.

Is a damper and flue the same thing?

A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation. Your damper should have a chain or handle that you can access in order to open and close it.

Can you go to bed with embers in the fireplace?

You should never leave a fireplace burning overnight, regardless of the source. Before you go to sleep, be sure to put out the fire and let the materials cool down. Unattended fire is a hazard, and even the slightest gust of wind can reignite it or blow embers to a nearby flammable material.