Is 24mm and 15 16 the same
What is the equivalent of 24 mm in standard?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
22mm | 7/8″ | |
5/8″ | 24mm | 15/16″ |
25mm | 1″ | |
3/4″ | 29mm | 1-1/8″ |
•
Apr 9, 2020
What can I use instead of a 24mm socket?
Use a 6-point 15/16 socket, and grind off the first 1/16th or so of the socket to eliminate the tapered face. Makes taking them out without stripping 10x easier.
What size is 24 mm socket?
1/2″ Drive 24mm 6-Point Metric Standard Length Impact Socket
Weight | 0.44 lbs |
---|---|
Nut End Outside Diameter (B) | 34.5 |
Socket Length (L) | 41.2 |
Socket Size | 24 |
Socket Type | 6 POINT |
What size socket is between 11mm and 12mm?
Wrench Size And Conversion Table
Inches | Millimeters | Spanner |
---|---|---|
0.433 | 11mm | 11mm |
0.438 | 7/16 AF | |
0.445 | 3/16 Wworth; 1/4 | |
0.472 | 12mm | 12mm |
Whats smaller than a 15/16 socket?
SAE Socket Sizes Chart
3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
---|---|---|
13/16″ | 1/2″ | 25/32″ |
7/8″ | 9/16″ | 13/16″ |
15/16″ | 7/8″ | |
1″ | 15/16″ |
•
Apr 17, 2021
What size is 13 16 in MM?
20.65 mm
Conversion table inches to mm
Dimensions — Inches to Metric | ||
---|---|---|
0.688” | 11/16” | 17.48 mm |
0.750” | 3/4” | 19.05 mm |
0.813” | 13/16” | 20.65 mm |
0.875” | 7/8” | 22.23 mm |
Do they make a 23 mm socket?
The metric 1/2-inch drive 12-point 23mm deep socket lives up to the brand name. Its deep well construction and internal construction make it easier for you to work with hard-to-reach fasteners.
What is a 1 inch socket in metric?
1 inch = 25.4 mm.
What is 36mm in standard?
A 36mm socket is 1 7/16″ in standard(SAE) size, almost.
What is the same size as a 23 mm socket?
SAE to Metric Conversion Chart
SAE | Metric | Inch |
---|---|---|
22mm | 0.866 | |
7/8″ | 0.875 | |
23mm | 0.906 | |
29/32″ | 0.906 |
•
Apr 29, 2020
What is a 17mm socket in standard?
17mm. Just short of 11/16 Inch. 0.66929 Inches.
What is 30mm in standard size?
30mm is 1.18″. That would be about a 1 3/16″ SAE size.
Is 3/8 and 10mm the same?
9mm = almost 3/8 inch. 10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch)
What is a 14mm wrench in standard?
Standard / Metric Wrench Conversion Chart
Bolt Diameter | Standard | Metric |
---|---|---|
1/4″ | 7/16″ | 11mm |
5/16″ | 1/2″ | 13mm |
3/8″ | 9/16″ | 14mm |
7/16″ | 5/8″ | 16mm |
•
Aug 26, 2019
What size is 30mm in inches?
1.1811 ″ 1 3/16 ″
Millimeters to inches conversion table
Millimeters (mm) | Inches (“) (decimal) | Inches (“) (fraction) |
---|---|---|
30 mm | 1.1811 ″ | 1 3/16 ″ |
40 mm | 1.5784 ″ | 1 37/64 ″ |
50 mm | 1.9685 ″ | 1 31/32 ″ |
60 mm | 2.3622 ″ | 2 23/64 ″ |
Is there a 10mm socket?
In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.
How do you measure mm in jewelry?
What size is 10mm in fraction?
Decimal | Fraction | Metric |
---|---|---|
0.1563 | 5/32 | 10 mm |
0.1575 | 10.32 mm | |
0.1875 | 3/16 | 11 mm |
0.1969 | 11.11 mm |
What can I use instead of a 10mm socket?
So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.
What socket gets lost the most?
It seems like the 10mm bolt size is the most common bolt size across most cars so, naturally, you’re going to use the 10mm socket the most. But, since the 10mm socket is so small, if you don’t remember where you place it, this is the socket you’ll most likely lose, hence all the memes.
What size is a bolt with a 10mm head?
Metric Shoulder Bolt Dimensions
Shoulder Diameter (A) | Thread (C) | Head Diameter (E) |
---|---|---|
6mm | 5mm x 0.8 | 10mm |
8mm | 6mm x 1.0 | 13mm |
10mm | 8mm x 1.25 | 16mm |
12mm | 10mm x 1.5 | 18mm |
Are 13/16 and 21 mm the same?
21 mm is . 826″, 13/16 is . 812″ . If you are getting a 13/16 socket on those, it’s a pretty sloppy socket.