How do you open a Bose SoundLink 2?

How do I fix my Bose SoundLink Color II?

If this doesn’t work, we can try a different type of reset:
  1. Connect the speaker to power.
  2. Press and hold the Multi-function button for 10 seconds.
  3. While continuing to hold the Multi-function button, unplug the speaker from power.
  4. Release the Multi-function button.
  5. The system must be re-connected to power to complete reboot.

Can you replace the battery in a Bose SoundLink color 2?

The SoundLink Color’s battery is known to lose charge after a few months of usage. This guide will show, step by step, how to take apart the device and replace the battery. Four round, plastic plugs are located on the back of the device. Using a metal spudger, carefully pry up the plastic covers.

How do you open a Bose color speaker?

Step 1 Outer Casing
  1. Four round, plastic plugs are located on the back of the device.
  2. Using a metal spudger, carefully pry up the plastic covers.
  3. The covers are all glued on, so be careful not to scar the casing when prying them off. If possible, use a spudger or plastic opening tool to remove them.

How do I fix my Bose SoundLink color?

How do you open a Bose speaker?

How do I reset my Bose SoundLink color 2?

This reset erases all settings and returns your product to its default out-of-box state.
  1. Power on your product.
  2. Press and hold the Power. button for about 10 seconds until the Bluetooth® light blinks blue and a voice prompt instructs you to select a language.

Why is my Bose SoundLink color 2 not working?

If your Bose SoundLink Color won’t turn on after you unplug it from a direct power source, you must hold the mute (three-dot) button. It takes about ten seconds for it to turn on from that action. When the first step doesn’t work, pressing the power button again should engage the product.

What are the buttons on Bose SoundLink color 2?

How do I get my Bose speaker out of battery mode?

Connect your product to an AC (mains) outlet to exit battery protection mode. The system enters battery protection mode to preserve battery power when the system is unplugged and unused for three days with a remaining charge of less than 10 percent. To reactivate the system, connect it to AC (mains) power.

Where is the multifunction button on Bose Soundlink?

How do I reset my Bose Soundlink color?

To restore the factory default settings:

Simultaneously press and hold the AUX and Volume – buttons for about 15 seconds until a tone is heard.

How do I get my Bose SoundLink Mini 2 out of battery mode?

Once the speaker is in battery protection mode it cannot be turned on by pressing the power button. To allow the device to exit this deep sleep mode, plug it into a power source and wait a few minutes. The speaker should (hopefully) be able to turn on again.

How do I know if my Bose Soundlink Color 2 is charging?

Connect the USB charging cable into a USB charging outlet.
  1. The product emits a tone when connected to power.
  2. The battery LED indicator flashes amber while charging.
  3. When charging is complete, the battery LED turns solid green.

Why is my Bose color Soundlink not turning on?

Disconnect the power connection from your product for a few seconds, then reconnect it. Within a few seconds of connecting power, a tone should play from your product.

How do I wake up my Bose SoundLink Mini?

How do I reset my Bose Soundlink mini 2?

To reset the Bose Soundlink Mini: Press and hold the Mute button for 10 seconds. To reset the Bose Soundlink Mini 2: Press and hold the Power button for 10 seconds. To Reset the Bose Soundlink Revolve: The Soundlink Revolve is the same as the Mini 2.

How do I check the battery on my Bose SoundLink color?

To check the battery level:

On the top of your product, press and hold the Power button until the power light shows one of the following: Green: 50% or more battery life. Amber: 10 – 50% battery life. Flashing red: Under 10% battery life.

Why won’t my Bose speaker charge or turn on?

The most common solutions for Bose speakers that are not charging are updating the firmware/software, resetting your bose speakers by holding down the Pause/Play or power button for 10 seconds, & holding the power cable while plugging in your charger, and releasing both simultaneously.

How do you reset a Bose SoundLink speaker?

To reset the Bose SoundLink Speaker:
  1. On the speaker, press and hold the Mute button for 10-12 seconds or until the LED Indicators Flash.
  2. The speaker should now be powered off, now press the Power button to power the speaker back on.
  3. Now, try connecting your Bluetooth device to the Bose SoundLink Wireless Speaker.