What is your victor vector?

To answer the question “What is our vector, Victor?”, Victor should state the heading they have been assigned to fly from ATC. An alternative question would be “What is your heading?” and then you would answer with the direction you are currently flying. Show activity on this post. Say again phraseology database.

What does it mean when a pilot asks for vectors?

A vector is a magnetic heading given to an aircraft from air-traffic control (ATC) to be flown for a period of time or distance. It can be a magnetic compass heading or the numerical value of that heading.

What is your vector Victor Airplane quotes?

Roger Murdock: We have clearance, Clarence. Captain Oveur: Roger, Roger. What’s our vector, Victor?

Do pilots use radio waves?

Pilots use radios as part of our everyday communications with ATC, engineers and, if you think about it, passengers via the PA system. As a result, knowing how to use this medium is essential to get our message across and ensuring the safety of the flight.

What is a vector approach?

The common vector approach (CVA) is a subspace method that eliminates unwanted information, such as environmental effects, personal and phase differences, and temporal variations from a spoken word.

What do pilots say when landing?

To indicate the landing clearance or final approach, the Captain will either make the following announcement and/or blink the No Smoking sign. “Flight attendants, prepare for landing please.” “Cabin crew, please take your seats for landing.” It may be followed by an announcement by a flight attendant.

What do pilots say when taking off?

“Fly heading two three zero, Runway two seven Left, Cleared for takeoff” (After takeoff, fly a magnetic heading of 230º. Cleared to takeoff on Runway 27 Left) “Cleared for the ILS, runway three four” (follow the Instrument Landing System, an electronic guidance system, to runway 34)

How far can a pilot see at 35000 feet?

At 30,000 Feet: You can see 211 miles from a height of 30,000 feet. At 35,000 Feet: You can see 228 miles from a height of 35,000 feet.

Why do pilots say Niner?

“Tree,” “fife” and “niner”

“Tree” for instance, means three, “fife” is the number five and “niner” means nine, says Tom Zecha, a manager at AOPA. The variations stemmed from a desire to avoid confusion between similar-sounding numbers, he says.

Why do pilots say heavy?

Thus, the term “heavy” (unlike light, medium and large) is included by heavy-class aircraft in radio transmissions around airports during take-off and landing, incorporated into the call sign, to warn other aircraft that they should leave additional separation to avoid this wake turbulence.

What does it mean when a pilot says heavy?

The word “heavy” means a larger aircraft type, with a Maximum Takeoff Weight of 160 tonnes or more. These aircraft create wake turbulence from their wings and require extra separation between following aircraft, and the use of “heavy” reminds other pilots of that fact.

Why is taking off called rotating?

Long story short, pilots say rotate as a verbal queue that the aircraft has reached its predetermined Vr and hence appropriate inputs can be applied to safely pitch the aircraft in a nose-up attitude to gain lift.

What should a pilot say before a flight?

Alpha, Bravo, Charlie, Delta, Echo, Foxtrot, Golf, Hotel, India, Juliet, Kilo, Lima, Mike, November, Oscar, Papa, Quebec, Romeo, Sierra, Tango, Uniform, Victor, Whiskey, X-ray, Yankee, Zulu. Numbers get special treatment too.

Why do they say souls on board?

ATC: 4194 Say souls on board. (This is the ATC terminology for asking how many people are in the plane. It is the standard terminology, and when you file any flight plan that’s the term for number of people on the plane; but when you hear it said out loud by a controller it’s usually a bad sign.

Why do pilots say V1?

A: V1 is the speed by which time the decision to continue flight if an engine fails has been made. It can be said that V1 is the “commit to fly” speed. V2 is the speed at which the airplane will climb in the event of an engine failure. It is known as the takeoff safety speed.

Why do planes drop after take off?

Since full power is only needed for takeoff, the pilot will reduce power to the aircraft’s engines and as a result, the noise in the cabin may decrease. The flaps and slats on the wings will also be retracted. It is also normal for planes to climb steeply and to turn, sometimes sharply, shortly after takeoff.

What is V2 aviation?

V2: Takeoff Safety Speed. V2 is the minimum speed that needs to be maintained up to acceleration altitude, in the event of an engine failure after V1. Flight at V2 ensures that the minimum required climb gradient is achieved, and that the aircraft is controllable.

What does squawk 7777 mean?

In the US, it seems that it is used as well on active air defense missions without ATC clearance. This would mean that the interceptor aircraft would change it’s squawk to 7777 for the military/civilian air traffic controller to see it properly (if not filtered out on civil radars).

At what speed plane takes off?

Typical takeoff air speeds for jetliners are in the range of 240–285 km/h (130–154 kn; 149–177 mph). Light aircraft, such as a Cessna 150, take off at around 100 km/h (54 kn; 62 mph). Ultralights have even lower takeoff speeds.

Why do pilots say Wilco?

TLDR – Wilco means “will comply.” It is a shorthand originally developed for two-way radio communication. It was originally preceded by “Roger,” which means “received.”

What does squawk 0000 mean?

2000: The code to be squawked when entering a secondary surveillance radar (SSR) area from a non SSR area (used as a VFR squawk code in some European countries) 0000: Military escort (in the US), suspected transponder failure (in the UK) 7777: Military interception (US/FAA)