What size motor do I need for a 14 foot boat?
Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.
How fast will a 55 pound thrust trolling motor go?
Assuming perfect riding conditions, the use of the best fuel i.e. the distillate marine diesel, and moderate load, 55-pound trolling motors are likely to attain a maximum speed of only 5 miles per hour. This would take around two hours for the deep cycle battery charge to get completely depleted.
How fast is a 40lb trolling motor?
It is true that the 30 lb, 40 lb, and 55 lb thrust trolling motors all top out at 5 miles per hour, but you will need the larger-sized motor when you have a larger boat. If you don’t, your boat will not be able to hit anywhere near the maximum speed.
How big of a boat can a trolling motor push?
Trolling motor size chart
| Boat weight (fully loaded) | Boat Length | Thrust for strong wind or current |
|---|
| 1500 lbs (or less) | 14 – 15 ft | 40 lbs |
| 2000 lbs | 16 – 17 ft | 50 lbs |
| 2500 lbs | 18 – 19 ft | 60 lbs |
| 3000 lbs | 20 – 21 ft | 70 lbs |
•
Jan 15, 2022
Will 2 trolling motors make you go faster?
Two motors in the back will just push the bow a little higher in the air, and the stern will dig in deeper, slowing you down. The boat will be faster with a trolling motor if it’s level in the water.
What size trolling motor do I need?
General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.
What size outboard do I need for a 15 foot boat?
What Size Outboard Do I Need For A 15 Foot Boat? You should find one to match your budget for a boat that is about 10-15 feet long. These lightweight boats won’t be quite as powerful as larger cars so they’ll have an engine about 15 horsepower in the range of 20-30 horsepower.
How deep should my trolling motor be in the water?
A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.
Can you have too much thrust on a trolling motor?
You can never have too much thrust and go with a variable speed. Not only is it more useful it also helps battery life. The one place that many people try to save money is on the electric trolling only to regret it.
What size motor can you put on a 16ft aluminum boat?
Aluminum boats are among the easiest boats to install a motor. It can have a range of 50-300 horsepower motors for maximal efficiency. This range already considers the boat’s size and usage. For a standard 16-foot aluminum boat, a 60 horsepower motor will suffice.
What is the biggest motor you can put on a 16 foot boat?
To achieve maximum efficiency, you’ll have to give it 50 to 300 horsepower. There’s a range of the required power as you take into consideration the size and usage. An aluminum boat that is 16 feet long needs to have a 60 horsepower motor.
How fast will a 25hp outboard go?
A 25hp Pontoon boat will not be very fast, with an expected maximum speed of between 5 and 10 mph. Most commercially accessible pontoon boats tend to average between 18 and 25 mph, although there are a few very quick production boats on the marketplace, plus some altered ones that have recently set world records.
How fast will a 125 hp outboard go?
A 36-40 mph speed is about right for this boat with this motor.
Is a 16ft boat big enough?
A 16-foot flat bottom or semi-vee aluminum is fine for fishing small, protected lakes, and for casual weekend action that may include a bit of bass fishing, maybe poling up some crappies or bluegills, and perhaps even a little drift fishing for catfish.
How heavy is a 16ft aluminum boat?
How much does a 16 ft aluminum boat and trailer weigh? This puts the boat in the 16 to 20-foot length range. The weight on these boats is usually between 1,500 and 2,500 pounds without the motor. With a larger engine and a trailer, you could be looking at a weight that is well over 5,000 pounds.
How fast will a 60 hp Mercury outboard go?
16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.
How much does a 60 hp Honda outboard cost?
$8,999.00$8,999.00. In Stock – New Honda 60 HP outboard Motor. 4-stroke with Electronic Fuel Injection (EFI). Unmatched maneuverability and convenience.
How fast will a 50 hp outboard go?
Depending on the type of boat and its weight, 50 hp can power you along at between 15 and 47 miles per hour. 50 hp may not seem like much, but if you are in a low-weight racing boat, you may be surprised by how far it can get you.
How much does a 60hp Mercury outboard cost?
MERCURY 60HP EFI 4-STROKE OUTBOARD (Listed Fri, 09 Feb 18)$9,170. 60 ELPT EFI Command Thrust – 20 Inch Shaft, Remote Steer. Unbridled power, unexpectedly compact, uncompromising reliability, unbelievable fuel efficiency. Unlike any other mid-range FourStroke the world has ever seen.
What RPM should I run my outboard?
Most mechanics and engineers suggest the best cruising speeds are achieved at 3400 and 3800 rpm respectively.
How fast will a 75 hp Mercury outboard go?
Yep, that 75 hp might be able to push the boat to 32 mph, but that’s with the throttle jammed against the stops.
How heavy is a 60hp Mercury outboard?
247 lbsSpecifications – 60 EFIHP / kW60 / 45SteeringRemote TillerShaft length20″ / 508 mm 25″ / 635 mm (CT model)Gearcase ratio1.83:1 or 2.33:1 (CT model)Dry weight *Lightest model available247 lbs / 112 kg