How much weight can a 14 ft jon boat hold?

A 14 foot Jon Boat will on average weigh about 160 pounds (72 kilos) not including the motor, and hold around 610 pounds (277 kilos) of people and gear. If you’re wanting to know other stats about 14 foot jon boats, such as price, speed, or max horsepower, you came to to the right place.

How much weight can a 15 foot jon boat hold?

Your 15 foot Jon boat therefore has an approximate weight capacity of 600 lbs.

How many people can fish on a jon boat?

The main difference between the 12-foot jon boat and the 14-foot jon boat is that with the 14-foot model, the load moves up to 3 people. 14 footers can accommodate most water sports like water skiing and wakeboarding. Just remember you’re in a flat-bottom boat so be careful of driving over wakes or choppy water.

How do I calculate my jon boat capacity?

For example, for a boat 18 feet long by 6 feet wide, the number of persons is 18 times 6 (or 108) divided by 15, which equals seven 150-pound persons (or a total person weight of 7 × 150, or 1050 pounds).

How much does a 16 ft jon boat weight?

10 Example Jon Boat Weights
Jon Boat ModelAverage Weight
Lowe L1436185 pounds (84 kg)
Crestliner 1600275 pounds (125 kg)
Alumacraft 16 Foot Jon Boat320 pounds (145 kg)
Crestliner 1800475 pounds (215 kg)

How do you increase the weight capacity of a jon boat?

Ways to Add Buoyancy to a Jon Boat
  1. Add flotation pods. …
  2. Move some of the heavier items to the front. …
  3. Add PVC tubes. …
  4. Built-in air cavities for buoyancy. …
  5. Adding buoyancy using foam.

Can you exceed max HP on a boat?

The maximum horsepower capacity marked on a boat must not exceed the horsepower capacity determined by the computation method discussed in paragraph (a) of this section, or for certain qualifying boats, the performance test method discussed in paragraph (b) of this section.

What determines max HP on a boat?

The federal government regulates the horsepower of outboard motors that can be installed on boats. The maximum HP is determined by calculating the boat’s factor (the length multiplied by the width) and then looking up the allowable engine size in a table.

What size outboard do I need for a 15 foot boat?

Tips for selecting the right size hp for portable outboard motor for your boat.
Motor HPBoat length (feet)Boat length (metres)
5hp – 15hp8′ – 14′up to 4.2m
9hp – 20hp11′ – 16′up to 4.5m
20hp – 40hp13′ – 18′up to 5.0m
40hp – 75hp14′ – 20′up to 5.5m

What is the biggest motor you can put on a 14ft jon boat?

For example, you can easily find that one particular 14′ foot Jon boat can take a 20 hp outboard motor while a different 14′ model can only handle a 15 hp, even though they are both made by the same manufacturer!

What happens if motor is too big for boat?

If one were to put a larger than rated motor on the boat there would be pressure and stresses applied that may be over the acceptable range for the boat and serious damage could occur.

Can I put a bigger motor on my boat than it’s rated for?

Can I use a bigger motor on my boat than what it’s rated for? It is not a violation of Coast Guard regulations to install or use an engine larger than specified on the capacity label, but there may be state regulations prohibiting it, and restrictions from your own insurance company regarding this.

How fast will a 9.9 hp outboard go?

Assuming this is a light 14′ utility boat and a standard 9.9, Mercury would recommend a 8.5 to 9.5 pitch prop for the OP’s application and predicts a top speed around 20 mph. In my experience with similar craft and outboards, this sounds very reasonable.

What is the biggest motor you can put on a 12 foot jon boat?

12-foot jon boats have an average weight capacity of 420 pounds and an average maximum horsepower of about 5 to 7 HP, however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more.

What size motor do I need for a 14 foot boat?

How Big A Motor Can You Put On A 14 Foot Aluminum Boat? Depending on the boat, a motor that produces 8-10 horsepower can produce plenty of power. Generally, a small tinnie moves faster if it’s powered by a 20-horsepower motor if its engine is heavy.

How do you get a jon boat on a plane?

With the motor trimmed in towards the transom gently increase speed so the bow of the Jon boat lifts up and out of the water. Then trim the motor up away from the transom. When the boat starts to slow stop trimming. The bow will drop and the boat will be on plane.

How fast is 15hp outboard?

2 guys and gear takes it down to about 20 to 22 mph.

How fast will an 8hp outboard go?

(6) 1436 G3 with 8hp merc tops out 16 to 18 mph.

How fast do hydrofoil boats go?

Powerboats have added friction from the propulsion system that has to remain in the water, but even then, large hydrofoiling ferries can exceed 45 knots. Speed is not the only advantage that hydrofoils give boats.

What does planing mean on a boat?

In technical terms, planing means that your boat is being supported by hydrodynamic lift instead of buoyancy. Boats typically, but not always, rely on one or the other when in motion. Buoyancy, or hydrostatic lift, is what keeps you afloat in a displacement hull vessel.

Why do boats fly slower?

A boat won’t plane out either due to a bad propeller, improper motor placement on the transom, wrong trim position, uneven weight distribution in the boat, low engine performance. However, there could be many other reasons, but primarily those elements will cause a boat not to plane.