Can you clean up pitted chrome?

By using a combination of dish soap, fine-grit sandpaper, metal polish, and a clear coat, you can clean and treat pitted wheels, restoring the condition of your chrome rims. The biggest appeal of your vehicle is the shine on the rims.

How do you remove pitting from chrome plating?

The best bet, once chrome has been washed with soapy water and dried, is to use a metal polish or chrome cleaner to get rid of any pitting or discolouration. A cheaper option, though, is to use some kitchen tin foil and a light oil or polish instead.

How do I clean corroded chrome?

Fill a spray bottle with undiluted white vinegar. Generously spray the corroded chrome and let the vinegar sit on the surface for 10 to 15 minutes. Dip a toothbrush or soft-bristled nylon brush into vinegar and scrub the corrosion off the surface. Wash the chrome with soap and water, rinse and dry it with a towel.

How do you refurbish a pitted chrome?

  1. Step One: Clean Chrome Surface. Use a microfiber or soft cotton cloth, dish soap, and warm water to clean the chrome’s surface. …
  2. Step Two: Polish the Chrome. Once the surface is clean, run a fingernail along the worst of the pitting. …
  3. Step Three: Reapply Clear Coat.

How do I refurbish chrome?

The Easiest Way to Restore the Chrome on Your Car
  1. Isolate the chrome part.
  2. Scrape off the rust.
  3. Treat the metal.
  4. Clean the chrome.
  5. Treat the rust.
  6. Let the metal polish dry.
  7. Buff it off.
  8. Polish the chrome.

How do you remove pitting from metal?

Wrap a sheet of 80-grit sandpaper around a sanding block and sand the pitted area aggressively. You can use a power sander instead of sanding by hand, but it might remove too much material and weaken the metal. If the metal item is very heavy, you can likely sand with a power sander.