How do I reset my AT&T wifi?

Restart your gateway or modem manually
  1. Unplug the power cord from the back of your gateway or modem. If you have: …
  2. Wait 20 seconds.
  3. Put the internal battery back in if you have one.
  4. Plug the power cord back in. …
  5. Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.

Why is my AT&T wifi not working?

Power cycle (reboot) your AT&T gateway – Unplug the gateway from the power outlet in the wall and wait two minutes before plugging it back in. After the Power, Broadband, and Service lights on your gateway turn green, verify that your connection has been restored.

How do I reset my wifi router?

What happens if I reset my AT&T router?

Whether you’re troubleshooting or setting up a new network, factory resetting your router or modem is sometimes necessary. AT&T U-Verse users can reset their devices to factory default, as well. Resetting your device will erase data like your WiFi name and password.

How do you fix your WiFi connection?

  1. Open your phone’s Settings app.
  2. Tap System Reset options Reset Wi-Fi, mobile & Bluetooth. If you don’t see “Advanced,” tap Network & internet More. Reset Wi-Fi, mobile & Bluetooth.
  3. At the bottom, tap Reset settings.

How can I reset my PLDT Wi-Fi?

Look for a small hole on your Wi-Fi modem. It is usually located near the power button. Using a pin or needle, gently press the button inside the small hole and hold for 5 seconds. Once your Wi-Fi modem restarts, connect it to your PC or laptop via a LAN cable.

How do I reset my PLDT modem?

To reset the PLDT router to its defaults, press the reset switch at the back of the router for about 10 seconds. Use a small pointed tool like a paper clip to depress the reset switch is accessible via a small hole at the back of the router. Wait for the router’s lights to turn off before releasing the switch.

What happens if I reset my Wi-Fi router?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

How do I know if my PLDT router is working?

The PON light indicator should be steady green if the patch cord is connected properly. If you are connected via WiFi, WLAN 2.4Ghz or 5Ghz light indicator should be steady green or blinking, if there is an ongoing data transmission.

What is PLDT username and password?

For PLDT Fibr, DSL and VDSL routers, the default username is admin and the password is also admin. The default gateway is 192.168. 1.1. You can login to your PLDT admin dashboard using those aforementioned credentials.

What is my PLDT username and password?

Type 192.168. 1.1 (the most common IP for PLDT routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your PLDT router is adminpldt.

How do I know if my PLDT Wi-Fi is disconnected?

Enter your telephone number starting with the area code or the 11-digit Ultera or Home WiFi number. For example, if your telephone number is 123-4567 and the area code is 02, then enter 021234567. The system will automatically detect that your account has been disconnected and inform you of such.

What are the lights on PLDT home Wi-Fi?

The Blue light means the best signal. Green means good and Red means bad. Blinking red means no SIM or signal. In my experience, since Smart’s signal is not that strong in our area, I only got the Green light.

Why is my PLDT Wi-Fi blinking red?

Generally, this network problem is closely connected to the optical fiber cable. If it has been damaged or extremely bent, or maybe the main line was cut off accidentally, you will see the LOS light blinking red. The same will happen if your ISP experiences service outage for some reason.

What will happen if you dont pay PLDT?

Non-payment – The Subscriber shall pay PLDT delinquency charges amounting to 1.0% per month of the outstanding Total Charges if the Subscriber fails to pay the Total Charges within thirty (30) days after the invoice date.

How can I activate PLDT Wi-Fi?

Plug in the power supply and turn on the Wi-Fi modem and press the WLAN button to enable it. Wait until the Power and ADSL led light indicator turns solid green. WLAN and internet light pulses green indicating that it’s ready to connect.

How long does PLDT take to reconnect?

Once you have paid your bill, reconnection is now made easy by calling our hotline 171 and going through our auto-reconnection option. Once the system detects the posting of your payment, your internet service will be reconnected within 1-2 hours.

How many months does PLDT disconnection?

Subject to one (1) month prior written notice to the Customer and provided that the Customer continues to fail to pay the required amount despite such notice, PLDT has the option to discontinue the service for non-payment of the overdue account, as well as other accounts involving other existing PLDT services which, …

Why PLDT first bill is high?

NOTE: Your first bill upon service activation may be higher than the subscription’s Monthly Service Fee (MSF) due to installation or activation fees and/or modem fees, if any and the pro-rated or partial MSF that is computed from activation date to bill cut-off date.

Can I pay overdue PLDT bill in GCash?

Yes! You can pay for overdue bills using GCash!

When should I pay PLDT bill?

When do I need to pay? To avoid service interruption, payment needs to be done on or before the billing due date located in your bill summary. To ensure correct posting of payments made through PLDT’s accredited payment channels, please double check the account details indicated in the proof of payment.

Is there a reconnection fee for PLDT?

In order to process your request, send a Letter of Authorization along with valid ID of account owner and representative. Reconnection fee will be charged which is Php 836.00 and will reflect above the bill.