how much grout do i need per square foot
How much grout do I need for 50 square feet?
Thinset & Grout Coverage Info
| FLOOR APPLICATION | WALL APPLICATION | COVERAGE (based on 50lbs bag) |
|---|---|---|
| 4 inch – 12 inch Tile | 4 inch – 12 inch Tile | 75 – 85 Sq Ft |
| 12 inch – 16 inch Tile | 12 inch – 16 inch Tile | 60 – 70 Sq Ft |
| 16 inch or larger | 16 inch or larger | 40 – 50 Sq Ft |
| Tile thicker than 3/8 inch | Tile thicker than 3/8 inch | 40 – 50 Sq Ft |
How many square feet does a bag of grout do?
Average Coverage
A 25-pound bag of dry grouting compound, when mixed with water, usually is sufficient to grout around 200 square feet of typical 4 1/4-inch square ceramic tile that is 1/4 inch thick, with 1/8-inch grout lines. A 200-square-foot area is equivalent to a wall about 8 feet high by 25 feet wide.
How much does it cost to grout tile per square foot?
Cost to Install Grout
| Item details | Qty | High |
|---|---|---|
| Unused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. | 0.0 h | $0 |
| Totals – Cost To Install Grout | 125 SF | $574 |
| Average Cost per Square Foot | $4.59 | |
How much does a 25 lb bag of grout cost?
Compare Similar Grout
| current product | ||
|---|---|---|
| Custom Building Products | Custom Building Products | Custom Building Products |
| White Dry 25 lbs. Non-Sanded Grout | Polyblend #381 Bright White 1 lb. Non-Sanded Grout | Polyblend Plus #381 Bright White 10 lb. Non-Sanded Grout |
| $1279 | $627 | $1797 |
| (10) | (1073) | (533) |
How much grout do I mix?
Q: What is the ratio for mixing grout? The ratio will vary slightly from product to product, but typically you’ll add two quarts of water to 25 pounds of powdered grout.
Do I want sanded or unsanded grout?
Sanded grout is best for grout lines ranging from 1/8-inch to 1/2-inch. Grout lines wider than 1/2-inch are impractical and will crack and become unstable. Because unsanded grout can also be used for 1/8-inch lines, between the two it is recommended that you use sanded grout.
How much is a 25 lb bag of grout from Home Depot?
Compare Similar Grout
| current product Best Seller | ||
|---|---|---|
| Custom Building Products | Custom Building Products | Custom Building Products |
| Polyblend #165 Delorean Gray 25 lb. Sanded Grout | Polyblend #60 Charcoal 25 lb. Sanded Grout | Polyblend Plus #386 Oyster Gray 25 lb. Sanded Grout |
| $1417 | $1417 | $1887 |
| (1692) | (1692) | (496) |
What kind of grout do you use in a shower?
Epoxy grout
Epoxy grout is water resistant and made from resins and fillers that help it work like a sealing adhesive. Epoxy grout is a better choice for showers, kitchen, bathrooms, and other damp areas because it is stain resistant and requires no sealing, unlike cement-based grout.
What kind of grout do you use for Penny tiles?
Non-sanded grout is more like fine dust and is best used in 1/16 in. gaps. Because of the pennies’ shape and placement on the penny sheets, the smaller gap where the pennies are closer to each other is about 1/16th of an inch BUT the rest of the gaps between pennies are bigger, therefore the need for sanded grout.
What is the difference between Polyblend and Polyblend plus grout?
Polyblend Plus has brighter, enhanced color and is more efflorescence resistant than its predecessor without compromising the durability professionals expect from the proven Polyblend product. Available in sanded and non-sanded versions, Polyblend Plus accommodates joints up to 1/8” (3mm) and meets ANSI A118.
How many square feet does Polyblend grout cover?
Coverage Chart
| Tile Size | Joint Width | |
|---|---|---|
| 1″ x 1″ x 1/4″ (2.5 x 2.5 x .64 cm) | 54 ft² (5 m²) | 40 ft² (3.7 m²) |
| 2″ x 2″ x 1/4″ (5 x 5 x .64 cm) | 96 ft² (8.9 m²) | 68 ft² (6.3 m²) |
| 3″ x 3″ x 1/4″ (7.6 x 7.6 x .64 cm) | 138 ft² (12.9 m²) | 96 ft² (8.9 m²) |
| 4.25″ x 4.25″ x 1/4″ (10.8 x 10.8 x .64 cm) | 192 ft² (17.8 m²) | 131 ft² (12.2 m²) |
How is grout sold?
Premixed grout is sold in sealed plastic tubs and is ready to apply right out of the container. You do not mix it with clean water or other liquids. Premixed grout is an unsanded grout and does not contain cement.
Is Polyblend plus a good grout?
Polyblend Plus has all of the great features of original Polyblend, plus some new value-added enhancements to improve performance, finished color, and color consistency. It is now an ANSI A118. 7 polymer-modified, cement-based sanded grout that produces hard, dense joints that resist shrinking, cracking, and wear.
Do I need to seal Polyblend plus grout?
Polyblend® Plus Non​Sanded Grout may be appropriate for joints up to 1/8″ or for tile not suited for sanded grout. Tile or stone with high absorption, surfaces that are porous or rough, textured surfaces and some types of porcelain tile may require sealing prior to grouting to prevent possible staining.
Does Polyblend grout need to be sealed?
Sealing the Grout
Since Polyblend grout is cement-based, it’s a good idea to seal it after it cures. Cement grout is porous, which means water and grease can soak into it and stain or damage the grout. Wait at least 48 to 72 hours after grouting to apply the sealer.
How much water do I add to Polyblend grout?
Mix 2.9 pt (1.4 L) clean water to 10 lb (4.5 kg) grout. Mix 7.25 pt (3.43 L) clean water to 25 lb (11.34 kg) grout.
Is Polyblend epoxy grout?
As a cement-based mix, polyblend grout is easier to work with than epoxy grout, and because the recommended additives are already in the mix, you don’t have to add liquid latex modifiers when mixing the grout, as you do with traditional grout formulations.
How do you apply Polyblend plus grout?
How do you mix small amounts of Polyblend grout?
How do you mix small amounts of Polyblend non sanded grout?
What is Polyblend grout used for?
Formulated for durability, Polyblend® Sanded Grout accommodates 1/8″-1/2″ (3.1- 12.7 mm) joints for interior or exterior installations, including floors, countertops, walls, ceilings, showers, fountains and pools.