What are the 6 types of cement?

The Six Types of Cement
  • Type I; Ordinary Portland Cement (OPC). This is a general purpose cement with no special properties. …
  • Type IP; Blended Cement (Pozzolan). This is also a general purpose cement, mainly used for concreting and plastering. …
  • Type II Cement. …
  • Type III Cement. …
  • Type V (SR Cement. …
  • Class “G” Oil Well Cement.

What is the most common type of cement?

Portland Cement
By its turn, Portland cement, which is by far the most common type of cement in use, is manufactured basically from limestone and clay (or marl) with lower amounts of gypsum.

What are the 5 types of portland cement?

Five types of portland cement are standardized in the United States by the American Society for Testing and Materials (ASTM): ordinary (Type I), modified (Type II), high-early-strength (Type III), low-heat (Type IV), and sulfate-resistant (Type V).

What is Type 4 cement used for?

Type IV portland cement is intended for use in massive concrete structures, such as large gravity dams, where the temperature rise resulting from heat generated during curing is a critical factor.

What are the 4 types of concrete?

Let’s take a quick look at the most common types of concrete and what they are used for:
  • Reinforced Concrete.
  • Lightweight Concrete.
  • High-Strength Concrete.
  • High-Performance Concrete.
  • Precast Concrete.

What is the strongest type of cement?

Ultra-High Performance Concrete (UHPC) is a cementitious, concrete material that has a minimum specified compressive strength of 17,000 pounds per square inch (120 MPa) with specified durability, tensile ductility and toughness requirements; fibers are generally included in the mixture to achieve specified requirements …

What is Type IP cement?

Cement Type Description

For example Type IP(MS) is a portland-pozzolan cement with moderate sulfate resistance properties. Other special properties are designated by (HS), for high sulfate resistance; (A), for air-entraining cements; (MH) for moderate heat of hydration; and (LH) for low heat of hydration.

What is the grade of cement?

Cement is available in 33 grade, 43 grade and 53 grade. The grade of cement is generally differentiated in terms of indicates the strength of cement. The strength of cement is generally measured as compressive strength. Compressive strength is the strength of cement molded in a standard cube, after 28 days of curing.

What is Type 3 portland cement used for?

TCC. 100722 PRODUCT DESCRIPTION Portland Cement Type III is a low-alkali, special purpose hydraulic cement used to make concrete for a variety of building construction, repairs, grouts, or mortar applications where higher early strength than Type I-II Portland is needed.

What is cement and types of cement?

Type 1 is a general use cement. Type 2 – Is used for structures in water or soil containing moderate amounts of sulfate, or when heat build-up is a concern. Type 3 – High early strength. Used when high strength are desired at very early periods. Type 4 – Low heat portland cement.

What type of cement is used in concrete?

As the cement and water mix, they harden and bind the aggregates into an impenetrable rock-like mass. Therefore: Cement + Aggregates + Water = Concrete. Note: Portland cement is the generic term for the type of cement used in almost all concrete.

What is the strongest type of cement?

Ultra-High Performance Concrete (UHPC) is a cementitious, concrete material that has a minimum specified compressive strength of 17,000 pounds per square inch (120 MPa) with specified durability, tensile ductility and toughness requirements; fibers are generally included in the mixture to achieve specified requirements …

What is PPC & OPC cement?

What is PPC Cement & OPC Cement? PPC Cement: Pozzolana is a natural or artificial material which contains silica in the reactive form. Portland Pozzolana Cement is cement manufactured by combining Pozzolanic materials. This cement comprises of OPC clinker, gypsum and pozzolanic materials in certain proportions.