What are the different types of plier?

Types of Pliers
  • Hose clamp pliers.
  • Crimping pliers.
  • Long nose pliers.
  • Diagonal pliers.
  • Slip joint pliers.
  • Snap Ring Pliers.
  • Tongue and Groove pliers.

What are 4 uses for pliers?

Hand Tools – Pliers and Wire Cutters
  • Use to grip small objects, reach awkward places, holding wires, bend loops, and attach wires.
  • Work involving smaller gauge wire.

What is the most common type of pliers?

The needle nose pliers are among the most common type of pliers that feature on the toolboxes of many households. Just like its name implies, it has narrow jaws that are thinner towards the tip.

What are plier tools?

Pliers are a hand tool used to hold objects firmly, possibly developed from tongs used to handle hot metal in Bronze Age Europe. They are also useful for bending and physically compressing a wide range of materials.

What are different names for pliers?

Pliers synonyms
  • tweezers. A small tool, consisting of two arms joined at one end, for plucking out hairs, handling little objects, etc. …
  • plyers. Plural form of plyer. …
  • pinchers. Alternative form of pincers. …
  • forceps. …
  • pair of pliers. …
  • pincers (related)

What pliers are used for cutting?

Long Nose: also known as needle nose pliers, the long, thin length of these non-adjustable pliers is used for cutting, holding, pulling and repositioning items in tight spaces and can reach areas other pliers can’t.

What are the 3 types of tools?

What are the Types of Hand Tools and how are They Important?
  • Laying out the tools – measuring tools.
  • Striking tools – hammers, and sledges.
  • Metal cutting tools – files, drills, reamers, etc.
  • Holding tools – Pliers and clamps·
  • Sharpening and grinding tools.

What are the 4 types of cutting tools?

  • Solid. In general, such a kind of cutter is employed as a lathe turning tool to perform the turning operations.
  • Tipped Tool. This cutter was developed from different materials. …
  • Tool Bit. This is a non-rotating cutter. …
  • Grain Size. Cutting tools depend on the grain size and the number of grains. …
  • Pointed Tool.

What are the 7 classification of hand tools?

General categories. The American Industrial Hygiene Association gives the following categories of hand tools: wrenches, pliers, cutters, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, saws, drills and knives.

What are the 5 types of hardware tools?

There are five main hardware components in a computer system: Input, Processing, Storage, Output and Communication devices. Are devices used for entering data or instructions to the central processing unit.

What’s a plier?

Definition of pliers

: a small pincers for holding small objects or for bending and cutting wire.

How would you describe a plier?

Pliers are a tool with two handles at one end and two hard, flat, metal parts at the other. Pliers are used for holding or pulling out things such as nails, or for bending or cutting wire.

How does a plier work?

Pliers consist of two levers that work in opposite directions. By exerting forces in opposite directions, you can use pliers to grab and hold objects firmly. You can use them to turn things, tighten things, bend things, or just hang on tightly.

What are pliers and wrenches?

Wrenches are designed to fit nuts, bolts and other standard fasteners. Pliers grip, turn, squeeze and rotate round or irregularly shaped objects of most any size, from baling wire to barbecue grills. One bit of advice: If you have a job that could be completed with either a wrench or pliers, use the wrench.

What is two pairs of pliers called?

rib joint pliers – a type of pliers. slip-joint pliers – pliers with a joint adjustable to two positions in order to increase the opening of the jaws. plural, plural form – the form of a word that is used to denote more than one.

What are the parts of pliers called?

Each pair of pliers consists of at least three parts: the jaws, the joint and the handles. The jaws and joint together are also called the head.

What is a universal plier?

Universal Plier is used for cutting or bending wire during orthodontic procedures. It features a flat-ended arm that can be used to give sharp bends. The rounded arm is used to make loops and circles in various dental applications.

What are big pliers called?

Also called seamer pliers, these pliers have rectangular, wide jaws and they’re used to bend sheet metal as well as form seams. They’re found commonly in industries where sheet metal’s used, such as metal shops.

What are reverse pliers called?

Bow Opening Pliers for opening bows or stretching bows and links. These are reverse action pliers, which enable the jaws to open when the handles are squeezed. Pliers feature 3 ridges to hold the bow in place, with gentle coil spring.