How much oil does a 2008 ford fusion hold
How many quarts of oil go in a 2008 Ford Fusion?
Both engine options for the 2008 Ford Fusion take 5W20 synthetic oil. The 2.3L inline-4 needs 4.5 quarts and the 3.0L V6 uses 6 quarts worth.
How much oil does a 2.3 Ford Fusion take?
4.5 quartsAfter
Engine Oil
With filter 4.5 quartsAfter refill check oil level.
How much oil does a 2.5 Ford Fusion take?
5.7 quarts
5.7 quarts. . (with filter)After refill check oil level.
How many quarts of oil does a Ford Fusion hold?
six quarts
Regular Oil Changes and Service
Your Fusion will use up to six quarts of oil.
How much oil does a 2.0 Ford Fusion take?
4.5 quarts
Engine Oil
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts. . (with filter)After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What type of oil does a 2008 Ford Fusion take?
The 2008 Ford Fusion uses SAE 5w-20 fully synthetic motor oil. The 2.3 liter inline-4 engine uses up to 4.5 quarts, and the 3.0 liter v6 engine uses up to 6 quarts. You will most likely pay between $2 and $13 per one-quart bottle of this fluid.
How much oil does a 1.5 L Ford Fusion take?
4.2 quarts
4.2 quarts. . (with filter)After refill check oil level.
How long can a Ford Fusion go without an oil change?
Ford recommends getting your 2021 Ford Fusion oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed every 7,500 – 10,000 miles.
How much oil does a 2009 Ford Fusion hold?
Capacity: 4.5 quarts. . (with filter)After refill check oil level.
How many quarts of oil does a 2013 Ford Fusion 1.6 take?
The 2013 Ford Fusion 1.6 EcoBoost has an engine oil capacity of 4.3 quarts. For recommend used Motorcraft SAE 5W30 5W-30 Premium Synthetic Blend or Full Synthetic motor oil. Any synthetic or synthetic blend can be used as long as it meets Ford specification WSS-M2C945-A and displays the API Certification.
How many Litres of oil does a Ford Fusion take?
Engine Oil
| Viscosity: | 5W-20 (Above -29) To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-20 oil meeting WSS-M2C947-A. |
|---|---|
| Capacity: | 5.4 litres. . (with filter)After refill check oil level. |
| Torque: | 21 ft/lbs (Oil Drain Plug) |
How many quarts of oil does a Ford Fusion 2011 take?
A SAE 5W-20 oil type is approved for use in the 2011 Ford Fusion, which displays the API Certification Seal. According to the Ford Fusion engine oil capacity, it is 5 US quarts (4. There are 7 liters in this container.
How much oil does a 2014 Ford Fusion hold?
The 2014 Ford Fusion oil type and capacity iS5w-20 and 5.7 quarts. Your oil needs to be changed eventually. Every 5,000 to 10,000 miles is a good rule of thumb.
What oil does a 2013 Ford Fusion 1.6 take?
Engine Oil
| Viscosity: | All TEMPS….5W-20 |
|---|---|
| Capacity: | With filter 4.3 quartsAfter refill check oil level. |
| Torque: | Oil Drain Plug…21 ft/lbs |
What oil does a Ford Fusion take?
Ford officially recommends that the Ford Fusion use full synthetic oil 5W-20 in normal climates, and OW-20 in extremely cold climates. However, depending on your driving habits and location this may not be a necessity.
How much oil does a 2010 Ford Fusion hold?
The 2010 Ford Fusion 2.5L engine oil capacity requires 5.3 quarts (5.0 liters). The 2010 Ford Fusion 3.0L Engine requires 6 quarts (5.7 liters) and the 3.5L engine oil capacity requires 5.5 quarts (5.2liters). Ford approved engine oil for the 2010 Ford Fusion is the SAE 5W-20 oil.
How much oil does a 2010 Ford Fusion take?
5.3 quarts
Capacity: 5.3 quarts. . (with filter)After refill check oil level.
How much oil does a 2013 Ford Fusion hold?
SAE 5W-20 is the best viscosity grade for the 2013 Ford Fusion. Ford advises to use engine oils meeting the oil viscosity requirements SAE classifications and has the API Certification Seal. The engine oil capacity for the 2013 Ford Fusion is 5.7 US quarts (5.4 liters).
How many quarts of oil does a 2012 Ford Fusion SE take?
2012 Ford Fusion – Specs
| Engine | 3.0-liter V6 FFV | 2.5-liter I-4 |
|---|---|---|
| Fuel Requirement | 87 octane unleaded | 87 octane unleaded or E85 capable |
| Oil Capacity | 5.5 quarts with filter | 5.0 quarts with filter |
| Coolant capacity | 10.6 quarts | 5.3 quarts (manual) |
| 6.9 quarts (automatic) |
How much oil does a 2018 Ford Fusion hold?
The oil type for the 2018 Ford Fusion is a full synthetic motor oil. The 1.5L 4 -cylinder prefers SAE 5W-20and can hold 4.2 quarts. Both the 2.0L 4 -cylinder and the 2.5L 4 -cylinder engines both SAE 5W-30 and have capacity for 5.7 quarts. The 2.7L V6 engine uses SAE 5W-30 and can hold 6 quarts.
How much oil does a 2015 Ford Fusion hold?
5.7 quartsAfter
Capacity: With filter 5.7 quartsAfter refill check oil level.
How much oil does a 3.0 Ford Fusion take?
| Engine lubricant oil capacity: | 5.7 liter / 6 U.S. qt / 5 imp. qt |
|---|---|
| Engine coolant capacity: | 10 liter / 10.6 U.S. qt / 8.8 imp. qt |
| Fuel tank capacity: | 66 liter / 17.5 U.S. gal / 14.5 imp. gal |