How do I reset my Soundcore wireless earbuds?

Why is my left Soundcore Liberty air not working?

Place both earphones back in the charging case and close it, then take them both out and try again. If this doesn’t fix the problem try resetting the headphones as below: 1. Delete the “Soundcore Liberty Air ” in the Bluetooth list of the device you’re connecting to, then turn off your device’s Bluetooth.

How do I fix my Soundcore Liberty air right earbud not working?

Place both earbuds back in the charging case, wait for 5s, then take them both out and try again. 2. If this doesn’t work, then reset the headphones refer to the manual and re-pair： (1) Place the earbuds into the charging case and make sure they are being charged for at least 10 seconds.

How do I reset my Soundcore Liberty Air 2?

– Press the button on the back of the charging case for 10 seconds until you see a red light flash 3 times on both earbuds. Then release the button. – Leave the case open. Wait until you see one light flash fast and the other flash slowly.

Why is the left earphone not working?

Check the settings

Headsets may play only in one ear depending on your audio settings. So check your audio properties and make sure that the mono option is turned off. In addition, make sure that voice levels are balanced on both earbuds.

How do I reset SoundCore life?

RESET
  1. You might need to reset the earbuds if you experience any connectivity problems or function issues.
  2. Place the earbuds into the charging case and make sure they are being charged. Press and hold the button on both earbuds for 3 seconds until the LED indicators flash red 3 times and then turn white.

How do I reset my SoundCore r100?

Reset
  1. Place the earbuds into the charging case and remain the case open.
  2. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times. This confirms that the reset was successful and your earbuds can be connected normally.

How do you reset an Anker SoundCore Bluetooth speaker?

How do I reset my Soundcore Liberty Air 2 Pro?

Step 1 : Place the earbuds in the charging case and leave the cover open. Step 2 : Press and hold the button on the case for 10 seconds until the LED indicators on the earbuds flash red 3 times and then turn white. Wait until the LED indicator on one of the earbuds flashes fast while the other flashes slowly.

How do I pair my Soundcore Liberty air?

Initially pairing the earbuds is super simple, and requires just moments. Open the charging case without removing the earbuds, this automatically powers them on. The right earbud will automatically connect to the left earbud. Enter the Bluetooth pairing menu on your device and select the Anker Soundcore Liberty Air 2.

How do I get both Soundcore earbuds to work?

Place the earbuds into the charging case and make sure they are being charged with a steady light on the earbuds. Press and hold the button on both earbuds for 3 seconds. The LED indicators will flash red 3 times and then turn white.

How do I reset my Soundcore Liberty 3 Pro?

How do I reset Liberty 3 Pro?
  1. Place the earbuds in the charging case and leave the cover open.
  2. Press and hold the button on the case for 10 seconds until the LEDs inside flash 3 times.
  3. The reset is successful when the LEDs flash fast. You can now connect the earbuds normally.

How do I pair my Soundcore Liberty 2?

How Do I Sync My Soundcore Liberty Pro 2? You can pair the earbuds by pressing and holding the button on the charging case for 3 seconds until the LED indicators on the earbuds flash white. To connect, select “Soundcore Liberty Air 2 Pro” from the Bluetooth list of your device.

How do you reset Anker Soundcore pro?

Press and Hold All Buttons at the Same Time

Try pressing and holding all buttons on the SoundCore simultaneously, for about 30 seconds, then press and hold the power button until it turns on.

How do I reset my Soundcore Liberty Air 3?

Reset if the earbuds cannot properly pair with each other or with other devices. Delete the pairing history from your Bluetooth device first. Place the earbuds into the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the LED indicators rapidly flash white 3 times.

How do I pair my Soundcore Liberty Air 3?

Why is my SoundCore not connecting?

Try clearing previous Bluetooth pairings from the Anker SoundCore’s memory to see if this resolves the issue. You can do this by pressing both the “Volume Down” and “Volume Up” buttons for roughly three seconds. Try pairing the Bluetooth speaker with your device again to see if this resolves the issue.

How do you reset an Anker SoundCore boost?

You should be able to perform a soft reset by pressing and holding the power button for 4 seconds when in a powered off state.

How do I put Liberty Soundcore earbuds into pairing mode?

Take the left earbud from the charging case or press once to turn on the left earbud—the white indicator light will be flashing. Then, quickly tap three times to enter pairing mode. The white indicator will flash slowly. Search “Soundcore Liberty Neo L” and pair it with your phone.

How do I connect a second device to Soundcore?

Click on the ‘Bluetooth’ menu item and the phone starts to automatically scan the available devices. After some seconds the SoundCore 2 appears in the list. Click on the SoundCore 2. The speaker plays a confirmation sound, the Bluetooth LED lights steady blue and it is connected together with the phone.