How do I fix E2 error on my Whirlpool washer?

Whirlpool error F05 or E2

This means there’s something wrong with the water temperature sensor. Time to reset the Whirlpool. Switch off the washing machine and remove the connector for 30 minutes. Afterwards, plug the washing machine back in and start it up again.

How do I fix E2 error on my washing machine?

What is E2 code on Whirlpool washer?

The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area.

Why does my washing machine say E2 error?

E2 on the washing machine display indicates that the water is draining too slowly. This usually occurs when the sewage is clogged, the filter is dirty, or the hose is blocked.

What does E2 error code?

The E1 or E2 error code is an Auto-Stop Protection Error, indicating an issue detected by a sensor. This error code will require service. The E3 error code displays when an Abnormal Operation Protection Error has occurred, and activates to protect the unit from damage.

What does E2 f2 mean on Whirlpool dishwasher?

Whirlpool gold series dishwasher error code e2 f2, means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board.

What does F2 mean on Whirlpool washer?

The F2 error code on the Whirlpool washer is indicated as F02, and means that the washer is taking too long to drain properly. This means there is come kind of problem with the washer’s draining system. Fixing this problem is moderately easy, depending on what the cause of the problem is.

What does F5 and E2 mean on a washing machine?

The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.

What is F2 on Whirlpool dryer?

F2 flashes when there is a stuck button or user interface mismatch. You can try performing a hard reset to fix the problem. Unplug or turn the circuit breaker off for 30 seconds.

What is F01 on Whirlpool Duet dryer?

If your Whirlpool dryer is displaying an F01 error code, this means there is something wrong with the control board or one of the components connected to it. It is commonly caused by a power failure or after a power surge occurs.

How do I fix code F01?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.

How do I fix my Whirlpool F01?

The F01 error means the main control board failed and needs to be replaced to fix the dryer. The only thing you can do is try and reset the electronics by killing power to it at the breaker/fuse panel on your home for one full minute then restore power. If after that the problem persists repalce board.

What does F1 mean on Whirlpool washer?

Usually, it’s a problem with the control board. By replacing the control board, you should be able to fix the problem. However, it might also be a problem with the hose, something might be stuck in the hose.

Can you reset a Whirlpool washing machine?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

How do I clear the error code on my Whirlpool washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

What does f11 mean on Whirlpool washer?

What does dL mean on a Whirlpool Cabrio washer?

The Whirlpool washer dL error code is a door lock error. When you start a cycle the ACU ( main control board) will attempt to lock the door up to 6 times.

How do you read a Whirlpool dishwasher code?

You need to count the number of times the clean light flashes to find out the error code on your Whirlpool dishwasher. As an example: If the clean light flashes 5 times followed by 2 flashes (5-2) then this error is showing the function code = “Door issue” and the problem code is “The door switch is in question”.

Can you reset a Whirlpool dishwasher?

To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in.

What is f8 on Whirlpool dishwasher?

8-1 (F8E1) – Slow drain or no drain. Confirm the pump is running to rule out a power problem. Remove power and turn off the water supply. Your first check is to confirm that the knockout plug on the garbage disposal is removed.

What causes a Whirlpool dishwasher not to drain?

The Whirlpool dishwasher not draining problem could be caused by a clog in the garbage disposal. If it’s just food waste causing the jam, use some water and vinegar to wash away any particles before running cold water through the drain for ten seconds or so. This should allow normal drainage again.