What are the 3 factors that affect your vehicle in a curve?

Vehicle Control in Curves

Your vehicle’s speed, the sharpness of the curve, the bank of the curve, and your vehicle’s load will affect the control you have in a curve. Speed You have no control over how sharp a curve is, but you can adjust your speed.

What are 3 steps can you take to check traction while driving?

Terms in this set (13)
  • Pick a fixed checkpoint ahead where you think you could stop.
  • Count off four seconds.
  • Check your vehicles position.

What are the factors that affect traction between a vehicle’s tires and the roadway surface?

Traction between your car’s tires and the surface of the road will be significantly reduced when the roadway is smooth, wet or slick due to environmental conditions. Rain, snow & ice, mud, wet leaves and chemical residue from vehicles are some of the worst traction-reducing substances.

What is the number one reason for loss of traction on the road?

DRIVING TOO FAST – The most serious loss of traction results from driving too fast for the conditions.

What three factors make up the total stopping distance?

Total Stopping Distance is the sum of the perception distance, reaction distance and braking distance.

What are four factors that affect braking distance?

4 Factors That Can Affect Your Stopping Distance
  • Speed. The time it would take you to come to a halt isn’t just calculated by the time it takes you to press your brake pedal. …
  • View of the Road. Bad weather will affect the ability of your tyres to grip the road sufficiently. …
  • Weather. …
  • Tread.

What is a factor that affects traction?

Factors considered in this paper are: tread design and compound, tire construction, inflation pressure, road surface, tire load, and temperature.

What is the main factor to consider regarding traction?

The total weight, weight distribution and condition of your vehicle partially determine how much traction you have. If you frequently drive where loss of traction is a risk – for instance, on poor quality roads or during harsh winters – you should consider these factors when purchasing and maintaining a vehicle.

What conditions affect traction?

Traction accounts for the grip of the tires to the road surface. Rain, snow tread wear, improper inflation, speed and road surface all affect tire traction.

What are 4 factors that affect control in a curve?

Terms in this set (65)
  • Speed.
  • Load of car.
  • Sharpness of curve.
  • Sharpness of band (steep)

What are 3 clues you should look for when identifying intersections?

Clues that an intersection is coming up:
  • Street lights and signs.
  • Roadway markings (turn lanes/crosswalks)
  • Stopping or turning traffic.
  • Pedestrians.
  • Rows of fences or mailboxes.
  • Power lines crossing over the street.
  • Curb bending away/ending.

What are the 3 key elements of analyzing the driving environment?

What three major elements should you always look for in any driving environment? Roadway features and changing conditions. Traffic controls in every situations. Identify traffic controls as soon as possible.
…
Terms in this set (30)
  • Identify.
  • Predict.
  • Decide.
  • Execute.

What are the three types of vehicle traction?

Three types of traction influence the control/or movement of a motor vehicle. They are: Static, rolling (dynamic), and sliding.

What are 2 things you can do to accommodate for less traction?

1. Check your rear zone to make sure no traffic is near. 2. Brake gently to see how your vehicle responds.

What features are designed to improve vehicle traction?

Electronic stability control (ESC) and traction control are two systems that are designed specifically for improving your car’s handling. Both units have built-in computer systems that notify your car when something goes wrong. ESC activates once your vehicle starts to lose control.

What three decisions must be made when applying the IPDE process?

What three decisions must be made when applying the IPDE Process? You may decide to change speed, change direction, or decide to communicate. What are the three different lane positions available to you within your lane?

What are three elements about which you must predict?

Three major elements in the traffic scene that you must make predictions about are: Actions of other roadway users, your control of your vehicle, and the consequences of your actions.

How do you increase traction force?

For low-friction surfaces, such as off-road or ice, traction can be increased by using traction devices that partially penetrate the surface; these devices use the shear strength of the underlying surface rather than relying solely on dry friction (e.g., aggressive off-road tread or snow chains)….

What are the two strategies that increase safety in all adverse driving conditions?

Keep your eyes moving and check your mirrors frequently. Avoid overheating your car, even in the winter. Slow down and increase following distance so you’ll have more time to react.

What are 3 of the important elements of any mobile HST application that determine the tractive effort developed?

Defining tractive effort

These terms apply to different operating conditions, but are related by common mechanical factors: input torque to the driving wheels, the wheel diameter, coefficient of friction (μ) between the driving wheels and supporting surface, and the weight applied to the driving wheels (m).