Do I need special recessed lights for bathroom?

Dry-rated lights typically handle low levels of moisture in bathrooms nicely because ventilation prevents the accumulation of too much condensation. In short, unless you’re wiring fixtures in close proximity to your shower, you can use dry-rated lights for most bathroom locations.

How do I choose recessed lighting for a bathroom?

Choose lights that are 4-inches or 5-inches in diameter to provide enough concentrated light for meal prep and cleanup. The best bathroom recessed lighting options are waterproof and designed for wet or moist locations. They will resist corrosion and are less likely to short circuit over time.

Can you put any light in a bathroom?

As long as you follow the correct safety procedures and make sure you install lights outside of the zones requiring IP rated fittings, you can use any lighting to make your bathroom as stylish as you like.

What type of lighting should be in a bathroom?

Chose bulbs or LED fixtures that emit light that is as close to white as possible—and be sure to chose bulbs with a high CRI (around 90-100) for the most accurate colors. Bulbs in the ‘soft white’ range of 2700K – 3000K are recommended for general bathroom use, and makeup application in particular.

Can you put recessed lights in a shower?

Bathroom recessed lighting offers a clean, modern look that blends into the architecture of the bath space. And, unlike regular wall or ceiling mounted light fixtures, recessed bath lights can be installed in shower stalls or over tub areas.

Is recessed lighting outdated?

The one reason why recessed lighting is timeless because they offer the flexibility to change the finishes later. You have a can in your ceiling that stays forever. However, the finish may become outdated and can be purchased in different colors and styles to suit your needs. You can change them as often as you like.

How high should you put a bathroom light over a vanity?

Place the light about 40 inches above the top of your vanity. The bathroom mirror height can affect that measurement if it’s oversized or hangs higher or lower than normal. Adjust the height as necessary based on the mirror positioning. To minimize shadows, choose a fixture that doesn’t stick out too far.

Is warm white or cool white better for bathrooms?

Warm white is great for bigger living spaces where you would like to give the room the ambiance of warmth, and an inviting sense. However, for bathrooms where you want the space to look and feel clean, there has been lengthy research conducted that says ‘daylight’ LED lighting is more preferable.

How bright should bathroom vanity lights be?

The American Lighting Association recommends a minimum value of approximately 1600 lumens for vanity lighting (for reference, one 60-watt incandescent bulb yields about 800 lumens on its own), although there is one important consideration that can alter this number: If the fixture you choose has an integrated LED light …

Should bathroom light hang over mirror?

Vanity mirror lighting should never overhang the mirror. Make sure the fixture isn’t extended past the mirror to avoid down lighting, which will cast shadows on the face. Take advantage of accent lighting to create a warm glow.

Should vanity light be same width as mirror?

Choosing the right size

While you want to ensure you have plenty of light, be sure to choose one that is no wider than your vanity or cabinet width, which may be wider than your mirror. Most people choose vanity bar lights that are about 75 percent of the mirror’s total width.

How much space should be between bathroom mirror and light?

The ideal distance between lights on either side of the mirror is about three feet (36 inches). If your mirror is wider than that, you may need to make adjustments.

How high above the sink should a mirror be?

The height of your mirror will also be determined by the height of your vanity. Ideally, the mirror should be mounted a few inches higher than the tallest point of your vanity faucet, or between 5 to 10 inches above the bathroom sink. You also need to account for your bathroom light fixtures.

How many lumens do I need for a small bathroom?

Lumens Quick Guide

Kitchen work areas: 7,000 to 8,000 lumens. Bathroom: 7,000 to 8,000 lumens. Home office: 6,000 to 8,000 lumens.

Can bathroom vanity lights hang over mirror?

Can Vanity Lights Hang Over Mirrors? Yes vanity lights can hang over mirrors, just be sure it all looks proportionate.

How high should outlets be in bathroom?

There are no set rules for the height of receptacles on walls or over counters, even in a bathroom. Good practice is to keep them at least 4 inches above a counter top or backsplash and not directly over a sink or under a window.

How many can lights in a small bathroom?

For small bathrooms, one sizable recessed light fixture may be enough to distribute abundant light throughout the space. In large bathrooms, consider a line of lights down the middle of the ceiling, or small recessed lighting fixtures around the perimeter. Create a cohesive style.

How high should mirror be above vanity backsplash?

Interior decorating guidelines suggest hanging all wall art with the center point at 57 inches, which means if your mirror is 2-feet tall, the top of the mirror should be 69 inches from the floor. Using this as a guide, subtract the measurements taken earlier of the counter and backsplash height from 57 inches.

How much space do you need between mirror and backsplash?

Framed mirrors should have a couple of inches between the lower edge and the backsplash. You will find that most of the time the mirror will look right between 5-10” above the sink.

What is the best ceiling light for a small bathroom?

To keep a small bathroom feeling open and spacious, refrain from installing any large or decorative ceiling lights. Instead, a flush mount ceiling light is the ideal option.

How far apart should 6 inch recessed lights be?

Generally speaking, recessed lights that are four inches in size should be placed four feet apart. Six-inch lights should be placed six feet apart. In other words, the diameter of the lights equals the space between them.

How do I know where to put recessed lighting?

A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.