how to quote a decking job
How do you estimate a decking job?
Labor costs will total just about two-thirds of the total project cost. With contractors charging, on average, about $35 per square foot. For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor.
How do you quote a deck?
The average cost of building a deck is about $20 – $50 per square foot, and most spend $4,000 to $12,000 to build one.
How much should I charge for a deck?
According to HomeAdvisor, as of 2020 the cost of most decks ranged between $4,153 and $11,219, with $7,686 being the national average cost of a new deck. The total average cost per square foot was between $30 to $60 with labor and materials each consuming about 50% of that budget.
How do you quote a deck painting job?
The cost to paint a deck ranges from $600 to $1,500 or about $2 to $5 per square foot. Painting a 300 square foot surface is $1,050 on average, but many factors can increase the price. The labor rate, material condition, and paint quality, for example, can all drive up the total.
How much does it cost to build a 20×20 deck?
A 16×20 foot deck made with pressure-treated wood would cost $9,600 to $11,200. A 20×20 deck using the same material would cost $12,000 to $14,000. A 16×20 deck using premium wood or wood composites would cost $11,200 to $19,200. A 20×20 deck using premium materials would cost $14,000 to $24,000.
How much does a 12×16 deck cost?
12×16-foot Raised Deck: You could build a 12×16-foot treated-lumber raised deck with stairs, for about $3,100 in materials. Hiring someone to do the work for you brings your total cost to $3,700-$9,500.
What is the average cost to stain a deck?
Average Cost to Stain a Deck
The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.
How much should I pay to have my deck painted?
Prices for deck painting and staining run about $2-$5 per square foot, depending on the size and condition of your deck. The type of paint or stain you choose will also affect the overall cost. Most projects average between $300-$1,200.
How much does it cost to stain a 12×12 deck?
A 12×12 deck costs $226 to $582 to stain when paying someone, or $59 to $176 to stain it yourself. A gallon of stain costs $20 to $50, which covers 200 to 300 square feet. Get free estimates from deck staining companies near you or view our deck stain cost calculator below.
Should I power wash my deck before staining?
Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper. After that, you can begin enjoying your deck, but you should inspect it about every year.
How much does it cost to build a 10×10 deck?
Cost To Build A Deck By Size
| Deck Size | Square Feet | Average Cost |
|---|---|---|
| 10×10 | 100 | $1,500 – $3,500 |
| 10×12 | 120 | $1,800 – $4,200 |
| 12×12 | 144 | $2,160 – $5,040 |
| 12×20 | 240 | $3,600 – $8,400 |
How many hours does it take to stain a deck?
While having dry conditions is the best way to ensure your project finishes quickly, Olympic MAXIMUM stains can be applied to a wet surface and dry in 8-12 hours.
Is it better to sand or power wash a deck?
DO sand your deck before sealing.
At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.
Is painting a deck better than staining?
While staining may take less time than painting, painting often does a better job of filling the cracks, covering imperfections, and provides longer lasting protection. Paint also is typically more rot resistance and does a better job of preventing mold and sun damage.
What happens if you stain a dirty deck?
When a deck stain is applied over an old failing stain it will start flaking and peeling within a year or so making an even bigger mess. After the deck cleaning or deck stain stripping process, a wood deck brightener is then needed. This “brightens” the wood while restoring back to the proper pH level.
What happens if it rains on a freshly sanded deck?
It’s important that you make sure there is no chance of rain when you begin to sand. If the wood gets wet after it’s been sanded, but not before you’ve had the chance to stain or paint it, you’ll be back to square one — you’ll need to wash and sand it all over again.
How do you restore a weathered deck?
Remove any damaged deck boards and cut off the rotted portion—all the way back to the centerline of the nearest joist. Use deck screws to reattach the good end, then cut a piece of like decking to fill the gap, and screw it to the joists. Check the handrails and balusters, then replace any damaged sections.
How long do you have to wait to stain a deck after power washing?
48 hours
After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.
Can you stain a deck over multiple days?
Ultimately you want two set aside at least two days. If you need to power wash your deck or replace any boards it may take you an extra day or two. It is ideal to stain your deck in a season that experiences mild temperatures. Extreme heat or sun can work against you when you are staining your deck.
How many dry days do you need to stain a deck?
You will want to set aside a minimum of two days, including drying time. If your deck needs to be power washed, or if the boards on the deck need replacing, you may want to set aside another extra couple of days. Be sure to have all of your supplies ready well ahead of time.
Can I stain deck without sanding?
If you’re wondering how to restain a deck without stripping or sanding the old stain off, we can help. To avoid stripping or sanding the old stain off your deck, thoroughly clean and rinse it, and then let the wood dry for 24 to 48 hours. Apply the same (or darker) stain color or tint from the same manufacturer.
What time of year is best to stain a deck?
The best time to stain your deck is either the spring or the fall. If you stain your deck in the summer, make sure you do it out of the direct sunlight. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure.