How do I get out of valet mode?

How do I get my remote starter out of valet mode?

What happens when you put your car in valet mode?

Valet mode disables all system features other than lock or unlock; such as, remote start, alarm triggers, and trunk release. Valet mode is used when the vehicle will be operated by someone who is unfamiliar with an Arctic Start system.

What is the valet override button?

The valet button or switch permits the owner to temporarily bypass the alarm functionality of the system. To enter or exit valet mode, disarm the system with a working transmitter, your personalized manual override code, or using the procedure below which is to enter or exit valet mode.

How do I turn off valet mode code alarm?

To enter or exit valet mode simply follow the 4 steps outlined below: Turn the vehicle’s ignition ON. Push and hold the programming/valet button.
…
To by-pass the alarm system:
  1. Open the vehicle door. …
  2. Turn the ignition key to the ON position.
  3. Within 10 seconds, press and release the valet push button switch.

Where is the valet switch located?

Enable Valet Mode

It is a small, black, momentary button that is usually mounted in an accessible, but not obvious location towards the bottom of the driver’s side dash. A common location would be on the driver’s kick panel cover, or on the side of the center console (if the vehicle has one).