How thick is a standard wall stud?

A two-by-four wall stud is 3 ½ inches wide, and an interior wall typically has ½-inch drywall installed on both sides, bringing the wall thickness to 4 ½ inches. Walls that contain plumbing, such as walls behind sinks, however, should be thicker than standard walls.

How wide are studs apart?

Most wall studs are spaced 16 inches apart on center; however, they can also be spaced at 24 inches.

What is a standard wood stud width in a home?

The most common dimensions of wall studs are 2-by-6 and 2-by-4. Wall studs for standard walls of 8 feet are 92 5/8 inches. In homes with 9-foot walls, the studs are 104 5/8 inches. Homes with a wall height of 10 feet use pre-cut studs at 116 5/8 inches.

How many inches wide is a stud?

When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you start in a corner and measure out 16 inches and you don’t find a stud, you should find one at 24 inches.

What is the standard stud distance?

Why You Should Find Studs

They’re always spaced either 16 or 24 inches on center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.

How far apart should 2×4 be in a wall?

Wall stud spacing is typically 16 inches on center for all load-bearing walls. In some areas and in some situations it’s permissible to use 24-inch spacing for two-by-four stud walls supporting only a roof above, or for two-by-six walls supporting one story and a roof above.

How long is a standard 2×4 stud?

2×4 studs are typically 8 feet long, to match the standard length of a sheet of plywood or drywall. You can also find 2×4 studs that are 92 ⅝” long, which allows builders to account for the thickness of the boards that run along the top and bottom of the wall.