What are the various symbols in a floor plan?

Most plans include symbols that are a combination of: Appearance (for instance, a bathtub looks like a bathtub) Conventions (double lines are commonly used to denote walls) Labels (for instance, a thermostat is labeled “T”).

How do you read House plan symbols?

How do you read an apartment floor plan?

So, for example, if the dining area is 10’4”x 8’2”, the room is ten feet, four inches wide and eight feet, two inches long. Usually, floor plan measurements are listed by width first and length second.

What is SH in floor plan?

SH or DH means single- or double-hung window, operable by either the bottom panel or both the top and bottom for a double-hung window.

How do you read a construction plan?

How do you read drawings and plans?

What is CB in floor plan?

CB is labeling closet spaces. These look like non-US plans, as they are in meters.

What sh means?

sh in American English

(ʃ: often a prolonged sound) interjection. used to urge or request silence.

What does C W mean on blueprints?

CAST-IN-PLACE. C/L. CENTRE LINE. C/W. COMPLETE WITH.

What does SS mean on building plans?

SS – Stainless Steel. SS – Stereo Speaker. SS-DS – Schedule of Design Services.

What is OTS in house plan?

Open to Sky (OTS) is an enclosed space within the building area which is open to the sky as the name itself suggests. These spaces are called enclosed because it is surrounded by the building units such as living room, kitchen and bedroom from all the sides.

What does TP mean in plumbing?

FLOOR SINK/FLOOR DRAIN. TRAP PRIMER VALVE. TP. GREASE SAN. GREASE SANITARY WASTE PIPING.

What does sed mean in construction?

The Term SED stands for small end diameter and is how all Construction Poles are measured and graded in accordance to size. All SED Construction Poles have a natural taper of 6-8mm per metre of length from the SED down to the LED (large end diameter).

What does SAB stand for in construction?

Sustainable Drainage Approval Body (SAB)

What does SB mean in construction?

Statute of Limitations: A statute of limitations is the time during which a suit may be brought. Even if the builder supplied a warranty for one or two years, it will likely not affect the rights to a remedy for construction defects since California law determines the length of time a lawsuit may be filed.

What is FFL civil?

1. SSL, FFL, SFL ABBREVIATIONS. • FINISH FLOOR LEVELFFL • STRUCTURAL FLOOR LEVELSFL • STRUCTURAL SLAB LEVELSSL.

What does CFM mean on floor plans?

C.F.M.: Cubic Feet per Minute.

What does SOP mean in construction?

Standard operating procedures
Standard operating procedures (SOPs) help to define a contractor and their business. It builds consistency, teamwork and common vision for how you approach your projects. SOPs represent your experience, knowledge and commitment to being the best contractor you can be.

What does above finished floor mean?

AFF – Above Finish Floor. This is an acronym commonly used in dimensioning. If you see a note saying 8′-0” AFF, it means that whatever is being referenced is 8 feet and zero inches above the surface of the finished floor (whatever you walk on, e.g. the surface of the tile, not the underlay) in that room.

What does finished floor mean?

A finish floor (also known as floor covering) is the top layer of flooring. In other words, it is the layer that you walk on, and it is typically quite decorative layer compared to the layers of flooring beneath it.

What is a finish floor level?

Re: What does Finished Floor Level (FFL) means in Contour Pl. 2. Fri Jul 23, 2010 4:08 pm. The height of your slab relative to a datum, generally but not always Australian Height Datum (AHD). So if the land has a level of 30.50 m, and your FFL is 31.00 m then your slab is 0.50 m above the ground level.

How do you find the finished floor level?

Locate the structural floor height specified in the flooring project plans. Add the combined height of the architectural floor material, substrates and adhesives to the structural floor height. This is the finished floor level.