Can I replace my toilet myself?

If you’re an experienced DIYer with plumbing knowledge and the required tools, installing a toilet yourself may be a great option. Not only will you save money, but you’ll have the satisfaction of completing the toilet installation yourself.

How hard is it to remove and replace a toilet?

What do I need to know when replacing a toilet?

How long does it take to change a toilet out?

Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.

Do you have to replace the wax ring when you remove a toilet?

Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.

Should you caulk around a toilet?

Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

Is it easy to fit a toilet?

Installing a toilet requires very little tools and with modern pans you’ll find that it’s easier than ever. We have listed below the tools you will need to install a toilet, as well as some extras that may come in handy.

How do I remove a toilet from the floor?

How to Move the Toilet Up to Install Flooring Under It
  1. Flush the toilet and hold down the handle until all the water clears the tank and bowl. …
  2. Remove the nuts located on the bolts found at the base of the toilet. …
  3. Remove the toilet by gently rocking the bowl back and forth until it loosens from the wax ring it sits on.

Can any toilet fit?

If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance. Toilets designed for a 10-inch rough-in measurement are relatively common.

How is a toilet installed?

How is a toilet connected to the floor?

The toilet flange, also known as a closet flange, is the part of the toilet that secures the unit to the floor and connects to the drain pipe. Usually made of PVC, rubber or metal, this piece is circular in shape and usually secured in place with a few bolts.

How much is a new toilet?

A new toilet can cost between $90 and $1,500 or more, depending on the type and brand of toilet. Homeowners can choose from basic two-piece toilets to high-end toilets, some of which include a bidet, lighting, and music.

What is a toilet auger?

A toilet auger is a specialized form of drain snake. Like other types of drain snakes, it has a handle that rotates a flexible metal cable that can bore through drain clogs.

How do I know what size toilet I need?

To measure the bowl shape, you can start by putting your measuring tape at the back of the toilet, and extend the tape forward to the end of the bowl, measuring parallel to the floor. The most important measurement you can take for a replacement toilet is the rough-in dimension.

How long do toilets usually last?

around 50 years
Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.

How much does it cost to replace toilet wax ring?

between $50 and $200
Replacing a wax ring, also referred to as a wax seal, will run between $50 and $200, including labor and materials. While the ring itself is inexpensive at $2 to $10, replacing it takes time and expertise. The closest flange may also need replacing, which can increase total project price.

What is better a 1 piece or 2 piece toilet?

One piece toilets are typically heavier and easier to clean, and there’s less space for bacteria to grow. Because two piece toilets feature a detachable tank, they’re more customizable for preferred styles and heights. Both styles can include bells and whistles like bidet attachments or low-flow energy saving.

Are toilet sizes universal?

Overall, a standard toilet will be between 27 and 30 inches deep, with a back height of 21 to 31 inches and a width of about 20 inches. An ADA-compliant version needs to have a seat height of 17 to 19 inches. This is one reason why partitions around ADA-compliant bathrooms are different.

How do I know which toilet to buy?

Always buy a toilet with the correct rough-in.
  1. To determine the size of your toilet rough-in, measure from the wall behind the toilet to the bolt caps of your current toilet. …
  2. Most toilets are available in a 12-inch rough-in, which is the standard distance, but a 10- or 14-inch rough-in may be needed in some homes.

Are round or elongated toilets better?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

Can you replace a two piece toilet with a one-piece toilet?

A. Yes, in most cases you can install a one-piece toilet to replace a two-piece toilet without it turning into a big project. Just make sure you use the same specification as your existing toilet as far as rough-in measurements and bowl size. Now for the question about one-piece toilets vs.