How often should I replace my watchdog battery?

A: The battery lasts anywhere from 3 to 5 years or so. The pump should last longer. You test it regularly and I would think about replacing from time to time, just for peace of mind.

How many years does a sump pump battery last?

Disadvantages. Battery must be replaced every five years (and costs about $100).

How long does a watchdog sump pump last?

As a general rule of thumb, during a power outage most new fully-charged batteries will last roughly 5-7 hours of continuous pumping and roughly 1-3 days of non-continuous pumping depending on the frequency. The longer the pump runs, the less power it has.

How many amp hours is the watchdog battery?

The Basement Watchdog Battery model 30HDC140S is not rated in amp hours. It is rated in Reserve Capacity at 182 min. @ 25 Amps. If you would compare this to a marine battery it would be around 700 cold cranking amps (CCA).

How do I know if my sump pump has a battery backup?

During the testing process, keep an eye on the battery indicator light. If it remains green, it is a good indication that your battery is strong. Fortunately, battery backup sump pumps have alarms that alert homeowners when the battery is nearing the end of its life.

Why is my basement watchdog beeping?

Dead or Dying Battery

If the battery has low power levels, this will trigger the alarm. There are a couple steps you can take to confirm your battery no longer holds a charge before you replace it with a new battery (or with the more reliable Water Commander system).

Can you recharge a sump pump battery?

Sump pump battery backup systems are smart devices. They have to be to realize when they’re needed, i.e. they are in sync with your main pump and know when to come on when the other doesn’t. Operating features usually include automatically recharging after power is restored.

Does the basement watchdog charge the battery?

Use the Basement Watchdog control unit for charging a LEAD-ACID battery only. DO NOT use the control unit for charging dry-cell batteries that are most commonly used with home appliances.

Can you use any battery with the basement watchdog?

Maintenance-Free batteries are compatible with all Basement Watchdog CONNECT® Backup and Combo Systems and Basement Watchdog Emergency Systems. May not be compatible with older versions of Basement Watchdog Special, Big Dog or Big Combo manufactured prior to 2014.

How do you charge watchdog batteries?

How do you maintain a sump pump battery?

How much does it cost to install a battery backup sump pump?

Sump pump battery backups cost an average of $900, with high costs of $1,200 and low costs of $600. Installing the system by yourself will cost between $160 and $600.

Compare Quotes From Top-rated Local Plumbers.
Highest Cost$1,200
Lowest Cost$600

How do I maintain my watchdog basement battery?

Why is my sump pump battery backup beeping?

This usually means your pump is not working because a) it is not receiving any or enough power or b) your pump is old, has worn out, and needs to be replaced. Your pump alarm goes off when it senses water which can also be, more rarely, that you have some sort of plumbing leak which has triggered the alarm from above.

Do sump pump batteries need water?

How do I stop my basement watchdog from beeping?

If you Basement Watchdog battery alarm won’t stop first make sure that there is nothing wrong with your pump system and there is no risk of a flood. After that check the power connection for the pump and battery back up as well as fill the unit to make sure it is not overheating or too cold air and at risk of freezing.

Can I use AGM battery with basement watchdog?

All current Basement Watchdog Battery Backup and Combination systems are designed to accommodate the maintenance-free AGM battery.

Are sump pump battery backup worth it?

Is a battery backup sump pump worth it? Adding a battery backup sump pump to your home means better protection against flooding and peace of mind during times of heavy rains and power outages.

How can I power my sump pump without electricity?

If you’re in an area where the power may be out for days rather than hours, the best option may be to use a house generator. The generator will be able to provide power to the house, appliances, and sump pump until the outage is over.

How do I reset my sump pump battery?

Follow these 5 simple steps to reset your sump pump:
  1. Disconnect the power. …
  2. Take the sump pump out of the basin. …
  3. Clean out the sump pump. …
  4. Return the sump pump to the basin and restart the power. …
  5. Reset the sump pump.

What size battery backup do I need for a sump pump?

The best sump pump battery backup runs on 12-volt, acid-free batteries. Some manufacturers recommend a battery that’s marine rated, which means it will withstand moisture better than a standard 12-volt battery. A 12-volt battery’s power can range from 40 to 80 amp hours or more, with 75 amp hours being the most common.

What type of battery is used for sump pump?

2. AGM Batteries. AGM stands for Absorbed Glass Mat and is a technologically superior battery, perfect for backup sump pump systems.