What is the best thing to use to clean a tanning bed?

A solution of vinegar and water can be used to disinfect tanning beds. Therefore, choosing a tanning bed cleaner with a disinfecting or sanitizing property is crucial. Regular water, even when mixed with soap, is not effective for cleaning a tanning bed.

Can you clean a tanning bed with Windex?

Cleaning Products to Avoid

Although ammonia-based cleaning products like Windex are pretty diverse regarding the various items they clean, acrylics are not one of those surfaces. When making a DIY tanning bed cleaner, you must be aware of the products that damage the acrylic.

What do tanning salons use to clean tanning beds with?

One of the most common and simple-to-use tanning-bed sanitizers is made by Australian Gold. This sanitizer is used by salons and home users alike because of its one-step use. Other major brands include Power Kleen, Lucasol and Ultra Clean.

What can I use to clean my tanning bed acrylic?

Combine equal parts water and white distilled vinegar in a spray bottle until it is full. You can find this type of white distilled vinegar at grocery stores. Shake mixture after tightening spray lid on the bottle.

Can you get STD from tanning bed?

The Herpes Association said that the herpes virus can be caught through “direct skin contact” where there is a “cut or break in the skin”. The faecal bacteria, the herpes virus, and a virus that causes warts are all able to survive on a tanning bed.

Can you use Lysol on a tanning bed?

It’s also safe on washable, hard, non-porous surfaces: enameled surfaces, painted woodwork, Formica®, and exercise equipment…and is safe for the acrylic surfaces of your tanning beds. Lucasolâ„¢ can also be used to sanitize and disinfect non-porous personal UV goggles such as Super Sunnies.

Can you use Barbicide on tanning beds?

BARBICIDE is for use in hospitals, health care facilities, tanning facilities and in beauty salons, barbershops, and hairstyling establishments. SURFACES: On inanimate, hard non-porous surfaces such as floors, sink tops, tables, acrylic tanning beds, telephones, toilet seats, and door handles.

Can I tan with my eyes closed?

Closing Your Eyes Isn’t Enough

The UV light in tanning beds is so strong that even closing your eyes during a tanning session won’t protect them. A few of the eye health problems that can result from indoor tanning are cataracts, macular degeneration, dry eye, sunburn, and blurry vision.

How do you use Lucasol tanning bed cleaner?

spray & wait 10 minutes. STEP 1 After use, spray the tanning bed spray with Lucasolâ„¢ disinfectant and let disinfectant sit for 60 seconds to kill 99.99% of bacteria, fungus, and virus. STEP 2 Wipe tanning bed surface to remove Lucasolâ„¢ and any tanning lotion residue. The bed is now sanitized.

How do you clean clear acrylic nails?

Stick with micro-fiber type of cloth. Avoid ammonia-based products, like Windex or other home glass cleaners, because they contain harmful chemicals that will actually damage the surface leaving it cloudy looking. Soapy water is the safest and most effective cleaning solution for acrylic.

What is the proper contact time for disinfection with Lucas Cide?

10 minutes
After cleaning, disinfect* the surfaces with LUCAS-CIDEâ„¢ disinfectant according to directions on the label. Surfaces must remain wet with the disinfectant for 10 minutes.

How do you mix Lucas Cide?

General information: Mixing ratio is 1/2 oz. per gallon of water. Please use appropriate measuring device (i.e. LPC measuring cup, squeeze and pour lid, or pump).

What is the proper ppm for diluted Lucas Cide?

660 PPM
MIXING INSTRUCTIONS

Use QUAT TESTâ„¢ STRIPS to ensure proper mixture (660 PPM). Cost-effective! One gallon makes 256 gallons of diluted solution; one quart makes 64 gallons!

How do you mix Lucasol?

LUCASOLâ„¢ Mix Tank 2.5 U.S. Gallons

of LUCASOLâ„¢ One Stepâ„¢ deodorizing disinfectant cleaner and add water to the top line of tank. Use the LUCASOLâ„¢ measuring cup and add water to the top line of tank. Use 40 pumps from the LUCASOLâ„¢ measuring pump and add water to the top line of tank. Great for larger salons!

Is Lucas Cide EPA registered?

LUCAS-CIDE is an EPA-registered Mason Chemical Company formulated disinfectant. Our EPA number is 10324-141.

What is Lucas Cide?

LUCAS-CIDE® #222 RTU is an acid-free, ready-to-use, all-purpose disinfectant, deodorizer and cleaner. This non-abrasive, pleasantly scented product is bactericidal, fungicidal and viricidal. It kills mold and mildew and inhibits their growth.

How do you use Cide disinfectant?

Just pre-clean the intended area, apply In-Cide undiluted to a sponge, brush, cloth or mechanical spray device. For spray applications spray 6-8 inches from surface. Do not breathe spray. Treated surfaces must remain wet for 10 minutes.