What are the 3 views of a drawing?

Although six different sides can be drawn, usually three views of a drawing give enough information to make a three-dimensional object. These views are known as front view, top view and end view. Other names for these views include plan, elevation and section.

What are the 6 orthographic views?

surfaces of the object positioned so that they are parallel to the sides of the box, six sides of the box become projection planes, showing the six views – front, top, left, right, bottom and rear.

What are the different types of views in drawing?

Types of Drawing Views
  • Base View. The first view created in a drawing. …
  • Projected View. An orthographic or isometric view that is generated from a base view or other existing view. …
  • Auxiliary View. A view projected perpendicular to a user-selected line or edge. …
  • Section View. …
  • Detail View. …
  • Overlay View. …
  • Draft View.

What are the 3 types of views in blueprints?

Types of blueprint drawings

Blueprints come in three major varieties: plan view drawings, elevation view drawings, and section view drawings.

What are the 3 views of isometric drawing?

You may be wondering about the three views that are hidden. They are called the Bottom View, the Left Side View, and the Rear View.

What is isometric and orthographic view?

Isometric: a method of representing three-dimensional objects on a flat surface by means of a drawing that shows three planes of the object. Orthographic: a method for representing a three-dimensional object by means of several views from various planes.

What are the 3 regular views of an object?

Typically, an orthographic projection drawing consists of three different views: a front view, a top view, and a side view.

What are the three 3 planes of projection?

Figure 5-4 shows the three principal (or primary) planes of projection, known as the VERTICAL, HORIZONTAL, and PROFILE PLANES.

How many views are there in drawing?

The most common way to communicate all the information is by using three different views in a multiview drawing: Front view. Top view. Side view.

What are the 4 orthographic views?

Orthographic drawings have a minimum of three views; top-view, side-view, and front-view. There are two main types of orthographic drawing: first-angle projection and third-angle projection.

What are the types of orthographic projection?

Three sub-types of orthographic projection are isometric projection, dimetric projection, and trimetric projection, depending on the exact angle at which the view deviates from the orthogonal.

What are the 3 main views of the orthographic projection?

An orthographic projection is a way of representing a 3D object by using several 2D views of the object. Orthographic drawings are also known as multiviews. The most commonly used views are top, front, and right side.

What is meant by orthographic view?

Definition of orthographic projection

1 : projection of a single view of an object (such as a view of the front) onto a drawing surface in which the lines of projection are perpendicular to the drawing surface.

What are the 3 planes of projection?

Figure 5-4 shows the three principal (or primary) planes of projection, known as the VERTICAL, HORIZONTAL, and PROFILE PLANES.

What is the pictorial view?

What is pictorial view? Pictorial view describes the angle in which a three-dimensional object is depicted on a drawing surface. Pictorial drawing can be divided into three main subcategories that all describe different views on a subject.

What is 1st angle of projection?

What is a First Angle Projection? The First Angle Projection schema imagines the object in the first quadrant. One can place an object on the top of the horizontal plane and at the front of the vertical planes. The first angle projection is utilized mostly in India and various European countries.

What is angle of projection?

The angle between the direction of projection and the horizontal drawn at that point is called the angle of projection.

What is the front view?

A front view is a projection view obtained by drawing perpendiculars from all points on the edges of the part to the plane of projection. The plane of projection upon which the front view is projected is called the frontal plane.